!TV/monitor
Connect either a component video cord or a composite video cord.
Composite video cord (supplied)
Yellow
| Green |
Red | Blue |
|
Component video cord (not supplied)
•To select progressive scanning mode (see page 7), use COMPONENT jacks.
•After connecting a TV, select the appropriate video signal output according to the color system. See “Changing the Color System and Scanning Mode” on page 7.
⁄Digital audio component
Optical digital cord (not supplied)
Protective cap
•Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” menu correctly according to the connected digital audio equipment (see page 46).
•The digital signal through the OPTICAL DIGITAL OUTPUT terminal is transmitted only when “DVD/ CD” is selected as the source.
@Voltage selector (only for CA-NXG7)
•This operation is not required for Saudi Arabian models and Australian models.
Use a screwdriver to slide the voltage selector so that it is pointing to the correct voltage in the area you are plugging in the unit. (See also the back cover page.)
Preparing the remote control
Insert the battery into the remote control by matching the polarity (+ and
If the range or effectiveness of the remote control decreases, replace both batteries.
When using the remote control
Point the top of the remote control towards the remote sensor as directly as possible. If you operate it from a diagonal position, the operating range (approx. 5 m) may be shorter.
6