~AM/FM antenna
To assemble the AM loop antenna
To connect AM/FM antenna
FM antenna (supplied)
Extend it so that you can obtain the best reception.
If the cords are covered with vinyl, remove the vinyl to expose the tip of the cord by twisting the vinyl.
AM loop antenna (supplied) Turn it until the best reception is obtained.
ŸSpeakers
When connecting the speaker cords, match the polarity of the speaker terminals.
CA-NXG7
From left speaker
Black
Red
Red
Black
From right speaker
NX-G3
From right speaker
Blue Black
For better FM reception
FM outdoor antenna (not supplied)
Disconnect the supplied FM antenna, and connect to an outdoor FM antenna using a 75 Ω wire with coaxial type connector (IEC or DIN45325).
Blue Black
From left speaker
•DO NOT connect more than one speaker to each terminal.
• DO NOT push or pull the speakers as this will damage the foot spacers at the bottom of the speakers.
5