JVC CA-NXG9 manual A-BRepeat, Time Search, 4Select the repeat mode you want, 5Finish the setting

4Select the repeat mode you want.

A-B	Repeats a desired portion (see the
	next column).
TITLE*	Repeats the current title.
ALL	Repeats the disc (not applicable
	for DVD) or programmed track.
CHAPTER**	Repeats the current chapter.
TRACK**	Repeats the current track.
OFF	Cancels Repeat Play.

*While playing a DVD-VR, “PG” appears, and while playing a Play List, “PL” appears.

**During Program Play and Random Play, “STEP” appears.

5Finish the setting.

A-B Repeat

You can repeat playback of a desired portion by specifying the beginning (point A) and the ending (point B).

•A–B Repeat cannot be used for MP3/WMA/WAV/ JPEG/MPEG-1/MPEG-2/ASF/DivX files and some DVDs.

1While playing, display the entire on-screen bar.

2Select OFF .

3Display the pop-up window.

DVD-VIDEO		Dolby D		TITLE 2	CHAP 3 TOTAL	1:01:58
		3/2.1ch
TIMEE	OFF		CHAP.	1/3	1/3	1/1

OFF

4Select “A-B.”

Dolby D

DVD-VIDEO 3/2.1ch

TIME OFF CHAP.

A–B

5Select the start point (A).

DVD-VIDEO		Dolby D		TITLE 2 C
		3/2.1ch
TIME	A-		CHAP.	1/3

6Select the end point (B).

A-B Repeat starts. The selected portion plays repeatedly.

• You can search for the end point using the ¡ button.

To cancel A-B Repeat, repeat steps 1 to 3, and select “OFF” in step 4.

•A-B Repeat will also be canceled when you stop play or skip the chapter or track.

Time Search

You can move to a particular point by specifying the elapsed playing time from the beginning.

•This function is not available during Program Play and Random Play.

1While playing (without PBC for SVCD/ VCD), display the entire on-screen bar.

•Time Search can also be used before starting playback (not applicable for DVD Video/DVD- VR).

2Select .

3Display the pop-up window.

DVD-VIDEO		Dolby D		TITLE 2	CHAP 3 TIME	0:00:58
		3/2.1ch
TIME	OFF		CHAP.	1/3	1/3	1/1
		TIME	_ : _ _ : _ _

4Enter the time.

You can specify the time in hours/minutes/seconds.

Examples:

To move to a point of 1 (hours): 02 (minutes): 00 (seconds), press 1, 0, 2, 0, then 0.

To move to a point of 54 (minutes): 00 (seconds), press 0, 5, 4, 0, then 0.

•It is always required to enter the hour digit (even “0” hours), but it is not required to enter the final zeros (the last two digits in the examples above).

•To correct a mis-entry, press 2 to erase the last entry.

Continued on the next page.

40