JVC CA-NXG9 Playable Disc/File Types, About color system, Note on Region Code, of the following

Playable Disc/File Types

COMPACT

DIGITAL VIDEO SUPER VIDEO DIGITAL AUDIO

•CD-R/-RW: Recorded in the Audio CD, Video CD, and SVCD formats. MP3, WMA, WAV, JPEG, MPEG-1, MPEG-2, ASF and DivX files written in accordance with the “ISO 9660” format can also be played.

•DVD-R/-RW, +R/+RW: MP3, WMA, WAV, JPEG, MPEG-1, MPEG-2, ASF and DivX files written in the UDF-Bridge format can be played.

•DVD-R/-RW: Recorded in the DVD Video format and the DVD Video Recording (VR) format.

•+R: Recorded in the DVD Video format.

•DVD-ROM: MP3, WMA, WAV files.

•USB mass storage class device: MP3, WMA, WAV, JPEG, MPEG-1, MPEG-2, ASF and DivX* files.

In addition to the above discs/files, this System can play back audio data recorded on CD-Extra and CD-G (CD-Graphics).

•The following discs cannot be played back: DVD-RAM, CD-I (CD-I Ready), CD-ROM, and Photo CD.

Playing back these discs will generate noise and damage the speakers.

•CD Text and DVD Text can be played, but Text information will not be shown on the display.

•It is possible to play back finalized +R/+RW discs.

•“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.

•This System can play back EVERIO file (see page 60) recorded on DVD, CD*, and USB mass storage class device*.

*Only when the maximum bit rate is less than 2 Mbps.

About color system

This System accommodates both NTSC and PAL system and can play back discs/files recorded in either system.

To change the color system, see page 7.

Note on Region Code

DVD players and DVDs have their own Region Code numbers. This System can play back only DVDs with an appropriate Region Code number.

•For details, see page 67.

•“REGION ERR” appears if DVD with a wrong Region Code is loaded.

Ex.: For Southeast Asia

Caution for DualDisc playback

The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of the Non-DVD side of a DualDisc in this product may not be recommended.

IMPORTANT: Before playing a disc/file, make sure

of the following...

•Turn on the TV and select an appropriate input mode on the TV to view the pictures or on-screen displays.

•For disc/file playback, you can change the initial setting to your preference. See “Setup Menu

Operations” on page 57.

If “ ” appears on the TV screen when you press a button, the disc/file cannot perform the operation you have tried to do.

•When playing a multi-channel encoded software, the System properly converts the multi-channel signals into 2 channels, and emits the downmixed sound from the speakers. To enjoy the powerful sound of these multi-channel encoded software, connect a proper decoder or an amplifier with a proper built- in decoder to the OPTICAL DIGITAL OUTPUT terminal on the rear.

How to cancel the demonstration

Press and hold DEMO button on the main unit (until “DEMO CLEAR” appears on the display) while on standby.

•Refer to the attached sheet “Information about the demonstration function.”

3