To turn off (standby) the System
The STANDBY lamp on the main unit lights in red.
•A small amount of power is always consumed even while on standby.
To open/close the front panel
On the remote: | On the main unit: |
1 sec
To drop the volume in a moment
To restore the volume, press again, or adjust the volume level.
For private listening
Connect a pair of headphones to the PHONES jack on the main unit. The sound will no longer come out of the speakers. “HPHONE IN” appears on the display for a while. Be sure to turn down the volume before connecting or putting on the headphones.
•Disconnecting the headphones will activate the speakers again.
DO NOT turn off (standby) the System with the volume set at an extremely high level; otherwise, the sudden blast of sound may damage your hearing, speakers and/or headphones when you turn on the System or start playback.
How to select a number
Examples:To select number 5, press 5. To select number 10, press 10. To select number 15, press 
10, 1, then 5.
To select number 30, press 
10, 3, then 0.
To select number 125, press 
10, 
10, 1, 2, then 5.
Listening to the Radio
To select the AM tuner interval spacing
Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing.
1Select “TUNER AM.”
2Select the AM tuner interval spacing.
To select 9 kHz:
(while holding...)
AM 9kHz
To select 10 kHz:
(while holding...)
AM 10kHz
To select the band (FM or AM)
10
