JVC CA-NXG9 manual Timer Operations, ON 8:00, Setting the Daily Timer, How Daily Timer works

Timer Operations

Remote control

AUDIO

CLOCK/

TIMER

CANCEL

ENTER/SET

SHIFT

Setting the Daily Timer

Using Daily Timer, you can wake up with your favorite music.

•Finish the timer setting at least 2 minutes before the on-time.

•To exit the timer settings, press CLOCK/TIMER (while holding SHIFT) as required.

•To correct a mis-entry during process, press CANCEL (while holding SHIFT). You can go back to the previous step.

How Daily Timer works

Once the Daily Timer has been set, the timer indicator () is lit on the display. Daily Timer is activated at the same time everyday until the timer is turned off manually (see “To turn on or off the Daily Timer” on page 55).

When the on-time comes

The System turns on, tunes in to the specified station or starts playing from the specified source, and gradually increases the volume level to the preset level after about 30 seconds.

•While Daily Timer is working, the timer indicator () flashes on the display.

When the off-time comes

The System stops playback, and turns off (on standby) automatically.

•The timer setting remains in memory until you change it.

1Select the timer setting mode.

(while holding )...
	Recording Timer			Daily Timer
	REC TIMER		ON (Time)	DAILY	ON (Time)
		Canceled		Clock setting
				(See page 20.)

ON 8:00

•When the clock has not been set, pressing CLOCK/TIMER makes the System enter the clock setting mode (see page 20).

54