JVC CA-NXG9 manual Stored, Class Device, To tune in to a station, To tune in to a preset station

To tune in to a station

While FM or AM is selected...

2 sec

Frequency starts changing on the display. When a station (frequency) with sufficient signal strength is tuned in, the frequency stops changing.

•When you repeatedly press the button, the frequency changes step by step.

To manually stop the search, press either button.

If the FM reception is poor

The MONO (monaural) indicator lights on the display. Reception will improve though stereo effect is lost—Monaural reception.

To restore the stereo effect, press the button again. The MONO (monaural) indicator disappears.

4Store the station.

STORED

To tune in to a preset station

1Select the band (FM or AM).

2Select the preset number for the station you stored.

• To select a number, see “How to select a number” on page 10.

To preset the stations

You can preset 30 FM and 15 AM stations.

1Tune in to a station you want to preset.

• You can also store the monaural reception mode	Playing Back a Disc/USB Mass Storage
for FM preset stations if it is selected.
2 Activate the preset number entry mode.	Class Device

To insert a disc

SET

• Finish the following process while the indication on the display is flashing.

3Select a preset number for the station you store.

•To select a number, see “How to select a number” on page 10.

•When using an 8 cm disc, place it on the inner circle of the disc tray.

To close the disc tray, press 0 again.

•If you press DVD/CD 6, disc tray closes automatically and playback starts (depending on how the disc is programmed internally).

11