Changing the Color System and Scanning Mode
You can select the video output to match it to the color system of your TV (NTSC or PAL).
•If you connect a progressive TV through the COMPONENT cords or the HDMI cable, you can enjoy a high quality picture by selecting progressive scanning mode.
•You can change the setting only while playback is stopped.
1
2 
When an HDMI cable is connected
AUTO | The System automatically emits the |
| video signal to get the best picture |
| quality on your TV. |
PAL 576P / | For a PAL TV. |
PAL 720P / | P: Progressive |
PAL 1080I / | I: Interlaced |
PAL 1080P |
|
|
|
NTSC 480P / | For a NTSC TV. |
NTSC 720P / | P: Progressive |
NTSC 1080I / | I: Interlaced |
NTSC 1080P |
|
|
|
When an HDMI cable is not connected
PAL 576I For a PAL TV. Select “PAL 576P” if PAL 576P you connect a progressive TV through
the COMPONENT jacks.
NTSC 480I For an NTSC TV. Select “NTSC NTSC 480P 480P” if you connect a progressive TV
through the COMPONENT jacks.
Front panel
To the headphones
From the digital audio player
From the USB mass storage class device
From the Bluetooth adapter
See page 38.
When connecting a USB mass storage class device
USB cable (not
supplied)
•When connecting with a USB cable, use the USB 2.0 cable whose length is less than 1 m.
•You can connect a USB mass storage class device such as a USB flash memory device, hard disk drive, multimedia card reader, etc. to this System.
7
To the microphones (only for CA-NXG9)
See page 44.
When connecting a digital audio player
Stereo mini plug
(not supplied)
From audio output (or headphone out, etc.)
• See page 14 for audio input level.
