ST1 Series Installation Guide
ST650211CF, ST650211FX, ST625211CF, and ST625211FX CompactFlash Interface Disc Drives
Publication Number: 100325579, Rev. C, May 2005
The easiest way to install your ST1 Series drive
Many of today’s consumer products, like cameras, notebook computers, MP3 players, printers and more have been designed to make it possible for the end user to use compact flash interface devices. Your Seagate ST1 Series drive is designed for such use. Refer to your product’s user manual for the location of the compact flash media compartment and the specific instructions regarding insertion and removal of removable media devices like the ST650211CF and ST625211CF models. Your product’s manufac- turer’s support website will have the most
The Seagate ST1 Series Flex interface disc drive models, ST650211FX and ST625211FX, are designed for embedded installation, or as a fixed storage solution. Follow the installation instructions provided on this instruction sheet. Your product’s manufacturer’s support website will have the most
Handling precautions/electrostatic discharge protection
• | ST1 Series disc drives are fragile. Do not drop or jar the drive. Handle |
| the drive only by the edges or by the finger grip area shown in Figure 1. |
| Keep the device in the packaging until you are ready to install it and |
| between uses to minimize handling damage. |
• | It may be necessary to turn off the power to the host product during |
| installation. Refer to your product’s user manual for details regarding |
Installing your ST1 Series CompactFlash model disc drive
Each product, which utilizes CompactFlash storage devices, has its own unique removable media compartment. Refer to the product’s user manual to locate the media compartment and for instructions on removing and installing media devices.
Warning. It may be necessary to turn off the product. Refer to your prod- uct’s operator manual for cautions, warnings and recommenda- tions on the installation and removal of media devices.
Note. This drive is designed for a product that supplies interface signals and +3.3V power through the compact flash connector. Refer to your consumer products manual to determine if your Seagate ST1 Series disc drive is compatible. See Figure 2 for drive dimensions.
|
| Recommended case |
| G | temp. measurement location |
FINGER GRIP |
| |
|
| |
|
| F |
Breather Hole |
| |
Do not cover |
| |
E |
| B |
Bottom View | D |
|
C
| Bottom |
|
|
| N | A |
|
|
|
| |||
|
|
|
| J | ||
|
|
|
|
| ||
H |
|
|
|
|
| K |
L | Top |
|
|
|
|
|
|
|
| M |
| ||
|
|
|
|
| ||
| Pin 1 | Pin 50 |
| |||
|
|
|
|
|
| |
Figure 2 ST1 Series - CF+ dimensions—end, top, and side views.
CF Dimension Table | FX Dimension Table |
installation and removal of media devices. |
• Do not disassemble the drive. Doing so voids the warranty. |
See the warranty information on page 2. |
• Do not expose the drive to extreme temperatures or humidity conditions. |
• Do not apply pressure, write on, or attach labels to the top or bottom of |
the drive. |
• Do not cover or otherwise obstruct the breather hole on the top of the |
drive. (See Figure 2 and Figure 3) |
• Keep the drive away from strong magnetic fields to avoid data loss. |
Figure 1 ST1 Series - Finger grip areas
Drive characteristics
| Inches |
| Millimeters | ||
A | 0.197 | ± .004 |
| 5.00 | ± .10 |
B | 1.433 | ± .006 |
| 36.40 | ± .15 |
C | 1.685 | ± .004 |
| 42.80 | ± .10 |
D | 1.015 | ± .003 | 2x | 25.78 | ± .07 |
E | 1.152 | ± .010 |
| 29.25 | ± .25 |
F | 0.299 | ± .010 |
| 7.61 | ± .25 |
G | 0.394 | min |
| 10.00 | min |
H | 0.063 | ± .002 |
| 1.60 | ± .05 |
J | 0.040 | ± .003 | 2x | 1.01 | ± .07 |
K | 0.039 | ± .002 |
| 1.00 | ± .05 |
L | 0.039 | ± .004 | 2x | 1.00 | min |
M | 0.065 | ± .004 |
| 1.65 | ± .10 |
N | 0.243 | ± .004 | 2x | 6.16 | ± .10 |
FINGER GRIP | G |
|
Breather Hole
Do not cover
E
Bottom View
| Inches |
| Millimeters | ||
A | 0.197 | ± .004 |
| 5.00 | ± .10 |
B | 1.433 | ± .006 |
| 36.40 | ± .15 |
C | 1.685 | ± .004 |
| 42.80 | ± .10 |
D | 1.015 | ± .003 | 2x 25.78 | ± .07 | |
E | 1.152 | ± .010 |
| 29.25 | ± .25 |
F | 0.299 | ± .010 |
| 7.61 | ± .25 |
G | 0.394 | min |
| 10.00 | min |
H | 0.063 | ± .002 |
| 1.60 | ± .05 |
J | 0.040 | ± .003 | 2x | 1.01 | ± .07 |
K | 0.039 | ± .002 |
| 1.00 | ± .05 |
L | 0.039 | ± .004 | 2x | 1.00 | min |
M | 0.065 | ± .004 |
| 1.65 | ± .10 |
P | 0.906 | ± .003 |
| 23.00 | ± .07 |
R | 0.669 | ± .020 |
| 17.00 | ± .50 |
S | 0.414 | ± .020 |
| 10.51 | ± .50 |
T | 0.130 | ± .004 | 2X | 3.30 | ± .10 |
Recommended case temp. measurement location
A 
F
B
D
| ST650211CF | ST625211CF |
Formatted capacity | 5.0 Gbytes | 2.5 Gbytes |
Total number of sectors* | 9,767,520 | 4,883,760 |
Cache size | 2 Mbytes | 2 Mbytes |
| ST650211FX | ST625211FX |
Formatted capacity | 5.0 Gbytes | 2.5 Gbytes |
Total number of sectors* | 9,767,520 | 4,883,760 |
Cache size | 2 Mbytes | 2 Mbytes |
*One sector equals 512 bytes.
Note. The Seagate ST1 Series CompactFlash disc drive is compatible with the CF+ and CompactFlash Specification 2.0.
Note. The Seagate ST1 Series Flex interface disc drive is compatible with the ATA version 7.
|
|
|
|
|
|
|
|
|
|
|
|
|
| R |
|
|
| |||
|
| Pin 45 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
| Pin 1 |
|
|
|
| ||||||||||||
|
| S |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
| P |
|
|
|
|
|
|
|
|
| T | |
|
|
|
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
| C |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| J |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| Bottom |
|
|
|
|
|
|
| K | |||
|
|
| ||||||||||||||||||
H |
|
|
|
|
|
|
|
|
| |||||||||||
|
|
|
|
|
|
|
|
| ||||||||||||
|
|
|
|
|
|
|
|
| ||||||||||||
|
|
|
|
|
|
|
|
| ||||||||||||
|
|
|
|
|
|
|
|
| Top | L |
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| M |
| ||
