JVC LVT1248-002A, LS-M1 manual Precautions, Checking the supplied parts

English

Thank you for purchasing a JVC product.

Before you begin using it, please read the instructions carefully.

Warnings, Cautions and Others

Warning

Observe the following carefully before installation; otherwise, the speaker may fall over, causing damage or injury.

–Do not install the speaker stand on an uneven surface or in a place subject to vibration.

–Do not lean against the speaker stand. Especially pay attention to children not to do so.

–Fasten all the screws firmly when assembling the speaker stand, and check its tightness afterwards regularly.

–Do not install any overweight equipment (over 10 kg) on the speaker stand.

7Precautions

•For safety use

–Do not climb or hang on to the speaker stand.

–Attach the speaker firmly to the speaker stand.

•For installation

–While installing the speaker on the stand, do not drop it from the stand. Pay attention not to damage the speaker cabinet.

–To obtain the best bass sound quality, install the speaker stand on the flat floor.

•For daily use

–Wipe with a dry, soft cloth if the speaker stand should become dirty. If very dirty, wipe with a cloth applied a small amount of water or neutral detergent, then wipe with a dry cloth.

–Do not use chemicals such as benzine and thinner for cleaning the speaker stand; otherwise, the speaker stand may deteriorate or its paint may come off.

7Checking the supplied parts

Check to be sure you have the following supplied parts.

The quantity of piece supplied is for one pair of speaker stands.

Top plate --------------------- 2

Screws ------------------- 6

Bottom plate --------------- 2

Screws ------------------- 6

Leg ------------------------ 2

	(thick)
Screws	------------------- 4

Leg ------------------------ 4

(thin)

Leg holder ------------------ 6

(Black: M6 x 30 mm) (Black: M6 x 16 mm)

If any item is missing, contact your dealer immediately.

(Silver: M5 x 28 mm)

2