JVC LVT1348-003A manual Time Search

4 Select the repeat mode you want.

ALL	Repeats all discs or all programmed
	tracks (not for some DVD Videos).
A-B	Repeats a desired portion (see below).
TITLE	Repeats the current title*.
GROUP	Repeats the current group.
DISC	Repeats the current disc (except for
	DVD).
CHAPTER	Repeats the current chapter.
TRACK**	Repeats the current track.
OFF	Cancels Repeat Play.

* During playing DVD-VR, “PG” (Program List) or “PL” (Play List) appears.

**During Program Play and Random Play, “STEP” appears.

5 Finish the setting.

A-B Repeat

•See also page 27.

•You cannot operate the A-B Repeat for DivX with the on-screen bar.

1 While playing, display the on-screen bar with the pull- down menu.

2	Select	OFF .
3	Display the pop-up window.
	DVD-VIDEO	Dolby	DISC 2	TITLE 2	CHAP 3 TOTAL	1:01:58
		2/0.0ch
	TIME	OFF	CHAP.	1/3	1/ 3	1/1

OFF

4 Select “A-B.”

DVD-VIDEO		Dolby	DISC 2	TITLE 2	CHAP 3 TOTAL	1:01:58
		2/0.0ch
TIME	OFF		CHAP.	1/3	1/ 3	1/1

A–B

5 Select the start point (A).

DVD-VIDEO	Dolby	DISC 2	TITLE 2 C
	2/0.0ch
TIME	A-	CHAP.	1/3

6 Select the end point (B).

A-B Repeat starts. The selected portion plays repeatedly.

• Before pressing ENTER, you can search for the end point using ¡.

Time Search

You can move to a particular point by specifying the elapsed playing time.

For DVD Video/DVD Audio/DVD-VR:

You can specify the elapsed time for the current title/ playlist.

For CD/SVCD/VCD:

•While playing back, you can specify the elapsed time for the current track except for SVCD/VCD with PBC.

•While stopped, you can specify the elapsed time for the disc except for SVCD/VCD with PBC.

1	Display the on-screen bar with the pull-down menu.
2	Select	.
3	Display the pop-up window.

DVD-VIDEO	Dolby	DISC 2	TITLE 2	CHAP 3 TOTAL	1:01:58
	2/0.0ch
TIME	OFF	CHAP.	1/3	1/ 3	1/1
	TIME	_ : _ _ : _ _

4 Enter the time.

You can specify the time in hours/minutes/seconds.

Ex.:

To move to a point of 1 (hours): 02 (minutes): 00 (seconds), press 1, 0, 2, 0, then 0.

To move to a point of 54 (minutes): 00 (seconds), press 0, 5, 4, 0, then 0.

•It is always required to enter the hour digit (even “0” hour), but it is not required to enter trailing zeros (the last two digits in the examples above).

•To correct a misentry, press cursor 2 to erase the last entry.

5 Finish the setting.

The System starts playing the disc from the selected playing time.

30