Warnings, Cautions and Others

IMPORTANT for the U.K.

DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appro- priate safety approved extension lead or consult your dealer.

BE SURE to replace the fuse only with an identical approved type, as originally fitted.

If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

If this product is not supplied fitted with a mains plug then follow the instructions given below:

IMPORTANT:

DO NOT make any connection to the terminal which is marked with the letter E or by the safety earth symbol or coloured green or green-and-yellow.

The wires in the mains lead on this product are coloured in accordance with the following code:

Blue : Neutral

Brown : Live

As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN.

CAUTION— STANDBY/ON button!

Disconnect the mains plug to shut the power off completely (all lamps

and indications go off). The STANDBY/ON button in any position does not disconnect the mains line.

•When the unit is on standby, the STANDBY lamp lights red.

•When the unit is turned on, the STANDBY lamp goes off.

The power can be remote controlled.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.Do not remove screws, covers or cabinet.

2.Do not expose this appliance to rain or moisture.

IMPORTANT FOR LASER PRODUCTS

1.CLASS 1 LASER PRODUCT

2.CAUTION: Do not open the top cover. There are no user service- able parts inside the unit; leave all servicing to qualified service personnel.

3.CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT.

CAUTION

•Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspa- per or cloth, etc., the heat may not be able to get out.)

•Do not place any naked flame sources, such as lighted candles, on the apparatus.

•When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.

•Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution: Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:

1 Front:

No obstructions and open spacing.

2 Sides/ Top/ Back:

No obstructions should be placed in the areas shown by the dimensions below.

3 Bottom:

Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more.

Front view

Side view

15 cm

15 cm

1 cm

1 cm

15 cm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15 cm

10 cm

UX-G1

15 cm

CA-UXG1

G-1

Page 1 Page 3
Page 2
Image 2
JVC LVT1356-001B manual Important for Laser Products
Page 1 Page 3

LVT1356-001B specifications

The JVC LVT1356-001B is a prominent speaker solution that caters to audiophiles and casual listeners alike, combining exceptional sound quality with seamless design. This model is renowned for its advanced features and reliability, making it a sought-after choice for both home and professional use.

One of the key features of the JVC LVT1356-001B is its impressive sound reproduction capabilities. The speaker delivers a balanced audio performance, thanks to its carefully engineered drivers that create a clear and dynamic range across various frequencies. Users can expect crisp highs, detailed mids, and powerful lows, allowing for an immersive listening experience no matter the genre of music.

The LVT1356-001B utilizes cutting-edge technology to enhance audio performance further. One notable technology included in this model is the integration of advanced signal processing, which helps to minimize distortion and maximize sound clarity. This ensures that even at higher volumes, the audio remains clean and true to the original recording.

In addition to sound quality, the design of the LVT1356-001B is both functional and aesthetic. Its sleek, modern exterior makes it an attractive addition to any space, whether it be a living room, studio, or office. The speaker is also compact enough for easy placement without sacrificing audio performance.

Connectivity options are expansive with the JVC LVT1356-001B. The speaker supports both wired and wireless connections, making it versatile for use with a variety of devices. The compatibility extends to smartphones, tablets, and other audio sources, allowing users to enjoy their favorite tunes with ease.

Durability is another hallmark of the JVC LVT1356-001B. Constructed with high-quality materials, this speaker is built to withstand regular use, making it an ideal choice for both home environments and professional settings. The robust design ensures that it can handle the demands of any audio enthusiast without compromise.

Overall, the JVC LVT1356-001B stands out for its impressive sound quality, advanced technologies, versatile connectivity, and durable design. Whether you are a music lover looking for a reliable speaker for casual listening or a professional seeking high-performance audio equipment, the LVT1356-001B is a remarkable option that delivers on all fronts. With its combination of features, it promises to elevate your audio experience to new heights.
Top Page Image Contents