37
10 : 2425. 12. 97
MERRY CHR ISTM AS
TAPE END
SP
–
05
MWB
DISP.
REC SEPIA
LENS COVER
FADE
T30
1MIN
1/2S
PAUSE
8
9
0
12 6 7
%
&
^
*
(
)
q
!
#
$
@
w
43 5
18MIN
Viewfinder Indications
%Battery Pack Remaining Power Indicator
Changes as follows according to the battery
pack’s remaining power level:
“”. When the power is
almost gone, the indicator blinks, then the unit
shuts off. Replace the battery pack with a fully
charged one.
(Note: The symbol containing 3 darkened
squares — — does not necessarily mean
that the battery pack is fully charged.)
^Focus Indicator ................................... Z pg. 16
&Exposure Level Indicator..................... Z pg. 15
*White Balance Mode Indicator ........... Z pg. 21
(Menu Setting Change Indicator........... Z pg. 22
)Condensation Warning
When this indication appears, all functions are
disabled. Turn the unit off (without removing the
power source) for a few hours, and when you
turn it on again the indicator should disappear.
qClock Warning
Displayed for about 5 seconds if the clock
(lithium) battery is not in place or is exhausted
when power is turned on.
Also displayed for about 5 seconds when clock
battery becomes exhausted while using the
camcorder.
For inserting or replacing the clock battery.
(Z pg. 8)
wTape End Display................................ Z pg. 12
Appears when the end of the tape is reached
during playback, recording or fast-forward.
INDEX
Viewfinder1 Cassette Warning/Remaining
Tape Time........................................... Z pg. 12
When no cassette is inserted or when Erase
Protection tab is not in the position that allows
recording, the Cassette ( )Warning blinks.
Otherwise, the Remaining Tape Time is dis-
played.
2Recording Mode (SP/LP) Indicator ...... Z pg. 10
3, 9 PROGRAM AE Indicator................ Z pg. 14Displayed at 3 for approx. 1 second when the
PROGRAM AE select dial is switched from one
position to another. Then only the indicator
remains at 9.
4Program Manager Function
Indication ........................................... Z pg. 18
Appears when the PROGRAM AE select dial is
set to any position other than AUTO LOCK.
5Lens Cover Warning ........................... Z pg. 12
6Tape Length Display ........................... Z pg. 10
7Zoom Level Indicator.......................... Z pg. 13
8Recording Indicator ............................ Z pg. 12
0Fade–Standby Indicator ...................... Z pg. 18
!Interval Time/Recording
Time Indicator..................................... Z pg. 24
@Record–Standby Mode Indicator......... Z pg. 12
#Instant Title Display ............................ Z pg. 19
$Date/Time Character Display.............. Z pg. 20