6
EN
CHG. (charge) indicator
G
ETTING
STARTED
Power
POWER indicator
END indicator
Marks
To AC outlet
This camcorder’s
NOTES:
●No function is available without power supply.
●Use only specified power supply.
●Do not use provided power supply units with other equipment.
CHARGING THE BATTERY PACK
SUPPLY POWER
1 Connect the charger’s AC power cord to a wall outlet. The power indicator lights.
REFRESH switch | REFRESH indicator |
**REFRESH
The AC power adapter features a REFRESH function that allows you to fully discharge the battery pack before recharging.
Perform the REFRESH function after no less than 5 chargings.
To discharge the battery . . .
..... attach the battery pack to the adapter
as shown in the above illustration. Then push REFRESH. The REFRESH indicator lights when discharging starts, and goes out when discharging is complete.
ATTACH BATTERY PACK
2 Align the marks and slide the battery pack in the direction of the arrow until it locks in place. The CHG. indicator lights.
DETACH BATTERY PACK
3 When charging is completed, the END indicator lights. Slide the battery pack opposite the direction of the arrow.
BATT. PACK | CHARGE | DISCHARGE |
approx. 1 hr. 10 min. | approx. | |
|
| 3 hrs. 30 min. |
approx. 2 hrs. 10 min. | approx. 7 hrs. | |
approx. 2 hrs. 40 min. | approx. 10 hrs. |
Hook on.
1
2 Push in.
BATT. RELEASE
ATTENTION:
Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.
USING THE BATTERY PACK
ATTACH BATTERY PACK
1 Hook its top end to the camcorder and push the battery pack in until it locks in place.
DETACH BATTERY PACK
2 Slide BATT. RELEASE and pull out the battery pack.
Approximate recording time (unit: min.)
BATT. | LCD monitor on/ | LCD monitor off/ |
PACK | Viewfinder off | Viewfinder on |
45 (30) | 55 (35) | |
100 (70) | 115 (75) | |
|
|
|
135 (95) | 155 (105) | |
|
|
|
( ): when the light is on.
