How to Replace Batteries
Use these instructions to replace the R6000 battery packs.
Before Replacing Batteries
Place the Compaq R6000 UPS in Bypass mode (See Chapter 3, “Operation”).
WARNING: To reduce the risk of personal injury, do not attempt to replace batteries unless all battery circuit breakers (UPS and any connected Extended Runtime Modules) are in the OFF position. There is a 400Vdc across the batteries.
Removing the Battery Packs
Follow this procedure to remove the battery packs:
1.Place the Compaq R6000 UPS in Bypass mode using the manual switch located at the rear of the UPS.
