Compaq R6000 manual Check Battery Recharge Label, Unpacking the UPS, Preparing the Rack

2-4Compaq R6000 Series UPS Operation and Reference Guide

Check Battery Recharge Label

Before unpacking the Compaq R6000 UPS, check the battery recharge date specified on the Battery Recharge Date Label affixed to the shipping carton.

Figure 2-1. Checking the battery recharge date label

IMPORTANT: Do not use the batteries if the recharge date has passed. If the date on the Battery Recharge Date Label has passed without the batteries being recharged, contact an Authorized Compaq Service Representative.

Unpacking the UPS

Transport the Compaq R6000 UPS to its install location in the shipping carton. Unpack the UPS close to the rack where it will be assembled, following the instructions on the carton.

WARNING: To reduce the risk of personal injury or damage to the equipment,

■Only use the lift-out tray to unload the UPS.

■Do not use the lift-out tray to transport or carry the UPS.

Preparing the Rack

Please refer to the Depth-Adjustable Fixed Rails Installation Card included with the unit for complete information on how to install the rails for the Compaq R6000 UPS.