|
|
|
| EN 11 |
|
| Shoulder Strap Attachment | ||
| 2 | 1 | ATTACH STRAP | 1 |
3 |
| Following the illustration at left, thread the strap | ||
1 |
| through the top of the eyelet | , then fold it back | |
2 |
| and thread it through the keeper 2, and then | ||
| 1 |
| through the buckle 3. Repeat the procedure to | |
|
|
| attach the other end of the strap to the other eyelet | |
4 |
|
| 4, making sure the strap isn’t twisted. | |
|
| ADJUST LENGTH |
| |
|
|
|
| |
|
|
| Adjust as shown in the illustration at left 1, then | |
|
| 2 slide both keepers snug against the eyelets to | ||
|
|
| prevent slipping 2. |
|
Tripod Mounting
ALIGN AND TIGHTEN
1 Align the screw and camera direction stud on the tripod with the camera’s mounting socket and stud hole. Then tighten the screw.
CAUTION:
When using a tripod, be sure to open and extend its legs fully to stabilize the camcorder. To prevent damage to the unit caused by falling over, do not use a
