EN 39
PRINTER SECTION
If | Check to see if | Reference | |
pages | |||
|
| ||
Picture data cannot | ⬤ Printer is in DV mode. |
| |
be transmitted | ⬛ Press IrDA/DV button to light the DV lamp. |
| |
through the DV | ⬤ Cable is in correct connection. | 10 | |
connection | ⬛ Make sure of proper connection. | ||
16 | |||
| ⬤ Picture is recorded on the DV tape. | ||
|
| ||
| ⬛ Use a tape with picture data recorded. |
| |
Picture blurred | ⬤ Camcorder with the DV connector is in Still |
| |
when printed from | Picture mode. |
| |
the camcorder with | ⬛ When installing a picture from the camcorder by | 16 | |
the DV connector | the DV connector to the printer, set the camcorder | ||
| |||
| with the DV connector in Still Picture. |
| |
|
|
| |
Picture data cannot | ⬤ Printer is in IrDA mode. |
| |
be transmitted | ⬛ Press IrDA/DV button to light the IrDA lamp. |
| |
through IrDA | ⬤ Picture data is being transmitted at a correct |
| |
reception | distance and angle. | 11 | |
| ⬛ Aim the transmitter right in front of the IrDA sensor | ||
| 18 | ||
| of printer and transmit within an approx. 50 cm | ||
|
| ||
| distance. Data communications may be difficult at |
| |
| a too close or too remote distance depending on |
| |
| the machines in use. |
| |
|
|
|