JVC LYT0633-001A 60 EN, Not due to any defect Unit. Effective dots more Than 99.99 %

60 EN TROUBLESHOOTING (cont.)

SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
27. Images on the LCD	27. • In places subject to low	27. • Adjust the brightness and
monitor appear dark or	temperature, images	angle of the LCD monitor
whitish.	become dark due to the	( pg. 14, 15).
	characteristics of the LCD
	monitor. When this
	happens, the displayed
	colours differ from those
	that are actually recorded.
	This is not a defect of the
	camcorder.
	• When the LCD monitor's
	fluorescent light reaches the
	end of its service life,
	images on the LCD monitor
	become dark. Consult your
	nearest JVC dealer.
28. The rear of the LCD	28. • The light used to illuminate	28. • Close the LCD monitor to
monitor is hot.	the LCD monitor causes it to	turn it off or set the POWER
	become hot.	Switch to “OFF”, and let the
		unit cool down.
29. The indicators and the	29. • This may occur when the	29.
image colour on the LCD	surface or the edge of the	————
monitor are not clear.	LCD monitor is pressed.
30. The LCD monitor or	30. • Certain Fade/Wipe effects,	30. • Re-read the sections
viewfinder indications	certain modes of Pro-	covering Fade/Wipe effects,
blink.	gramme AE with special	Programme AE with special
	effects, “DIS” and other	effects and “DIS”
	functions that cannot be	( pg. 24, 28 – 31).
	used together are selected at
	the same time.
31. Coloured bright spots	31. • The LCD monitor and the	31.
appear all over the LCD	viewfinder are made with
monitor or the viewfinder.	high-precision technology.
	However, black spots or
	bright spots of light (red,
	green or blue) may appear
	constantly on the LCD	————
	monitor or the viewfinder.
	These spots are not
	recorded on the tape. This is
	not due to any defect of the
	unit. (Effective dots: more
	than 99.99 %)