NOTES:
●When the USB cable is connected, turning on or off the camcorder or switching the VIDEO/MEMORY (DSC) mode on the camcorder causes malfunctions of the PC.
●If you connect the camcorder to the PC through a USB hub, compatibility issues between the hub and the PC may result in instability in the operation of the PC. If this happens, connect the camcorder directly to the PC, not through the hub.
●Do not use an extension USB cable.
●You can also use a DV cable instead of a USB cable to capture video from a tape when using ImageMixer. For more details, refer to the online help. ( “For more detailed information” in the ImageMixer instruction manual on the
Viewing the Contents of a Memory Card (Windows®)
1Install [USB Mass Storage Class driver]. ( pg. 5)
●Windows® Me/2000/XP: There is no need to install this driver. Simply connect the camcorder to the PC with a USB cable, and you can read and write memory cards in the camcorder.
2Connect the camcorder to the PC with a USB cable. ( pg. 9)
3Make sure that there is a memory card in the camcorder.
4Set the camcorder to the memory card playback mode.
●Refer to the camcorder’s instruction manual for details.
[USB MODE] appears on the camcorder’s LCD monitor.
5
Computer] window.
NOTE:
Windows® 98/98SE:
[Removable Disk] icon does not appear if USB Mass Storage Class driver is not installed properly. In this case, refer to “Updating [Device Manager] (Windows®)” ( pg. 8).
6
The following folders are automatically created in the memory card. Different file types are stored in different folders.
Navigation data |
|
|
|
|
|
| Sound effects | |
|
|
|
|
| ||||
|
|
|
|
|
|
|
| DPOF Setting data |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| ||
Still images |
|
|
|
|
|
| Video clips | |
|
|
|
|
|
| |||
|
|
|
| |||||
Still images | : | Folders within the [DCIM] folder |
(extension “.jpg”) |
|
|
Video clips | : | Folders within the [DCVI] folder |
(extension “.asf”) |
| ● The [DCVI] folder is displayed only when the camcorder is equipped with |
|
|
— 10 —
CONTINUED ON NEXT PAGE