For ImageMixer with VCD

In addition to the requirements on the previous page, the following requirements must be satisfied to use ImageMixer with VCD.

OS

: The same as requirements on the previous page.

 

 

However, Windows® 98 cannot be used when you connect a camcorder to the

 

 

PC with a USB cable.

 

 

Windows® 98, Windows® 98SE cannot be used when you connect a camcorder

 

 

to the PC with a IEEE1394 (DV) cable.

CPU

: For capturing video via a USB cable or IEEE1394 (DV) cable, Intel Pentium® III, at

 

 

least 500 MHz, at least 800 MHz recommended

Free hard disk space

: At least 300 MB for installation, at least 1 GB recommended

Connector

:

IEEE1394 (i.LINK) connector

Miscellaneous

:

DirectX 8.0a or later

Macintosh

Hardware

: iMac, iBook, eMac, Power Mac G4, PowerBook G3 or G4 equipped with a USB

 

connector

OS

: Mac OS 9.0.4 to 9.2.2

 

Exclude Mac OS X and Mac OS X [Classic]

RAM

: At least 64 MB recommended

For ImageMixer with VCD

In addition to the requirements above, the following requirements must be satisfied to use ImageMixer with VCD.

CPU

: At least PowerPC G3/400 MHz or PowerPC G4/400 MHz

RAM

: At least 128

MB recommended

Free hard disk space

: At least 150

MB for installation, at least 1 GB recommended

Display

: Must be capable of displaying 800 x 600 dots with 32,000 color

Miscellaneous

: QuickTime 4 or later

The system requirements information above is not a guarantee that the provided software will work on all personal computers meeting those requirements.

If your PC does not meet the system requirements above, you can use the optional USB reader/writer CU-VUSD70, the PC card adapter CU-VPSD60 or the floppy disk adapter CU-VFSD50 to load the files in the memory card to the hard disk on your PC.

(Refer to “JVC Accessories” on our world web site at: http://www.jvc-victor.co.jp/english/accessory/)

Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Macintosh is a registered trademark of Apple Computer, Inc.

Other product and company names included in this instruction manual are trademarks and/or registered trademarks of their respective holders.

— 4 —