Installing the drivers for using the camcorder as a web camera

When you connect the camcorder to the PC with a USB cable at first time, four drivers are installed in succession.

NOTE:

Click [Continue Anyway] when the message [Has not passed Windows Logo testing] appears. Be sure not to select [Stop Installation]. If you do so, the drivers will not be installed correctly.

1Load the provided CD-ROM in the PC.

●If the [Important Notice] dialog box appears, click [Next] and then [Quit] to close the dialog box.

2Click [Install from a list or specific location (Advanced)] and then click [Next].

●The driver search dialog box appears.

3Click the next three items in the order below.

A [Search for the best driver in these location] B [Include this location in the search]

C [Browse]

4Double-click the CD-ROM drive icon and the [XP] folder, and then click [OK].

●The driver search dialog box appears.

5Click [Next].

●The warning message appears.

6Click [Continue Anyway].

●After a moment, the [Found New Hardware Wizard] dialog box appears.

7Click [Finish].

●After a moment, the [Found New Hardware Wizard] dialog box appears again.

8Repeat steps 2 to 7 until the [Found New Hardware Wizard] dialog box does not appear.

●After you repeat steps 2 to 7 four times, the installation is completed.

— 10 —