18 EN | VIDEO PLAYBACK |
Normal PlaybackBLANK SEARCH | |
| Button | |
| Play/Pause Button (4/9) | VOLUME Wheel |
| |
| Rewind Button (3) |
|
| Stop Button (8) |
|
Playback Mode
Switch
Power Switch
1Open the LCD monitor fully.
●Set the Video Output Mode Switch to “LCD MONITOR”. ( pg. 13)
2Load a cassette. ( pg. 16)
3Set the Playback Mode Switch to “VIDEO”.
4Set the Power Switch to “ON” while pressing down the Lock Button located on the switch.
5To start playback, press 4/9.
6To stop playback, press 8.
●During Stop mode, press 3 to rewind, or 5 to
Battery pack | DV mode | HD/SD mode |
|
|
|
1 hr. 40 min. | 1 hr. 30 min. | |
|
|
|
3 hr. | 2 hr. 50 min. | |
|
|
|
* Provided |
|
|
NOTES:
●Clean the video heads using an optional dry cleaning cassette when:
•No picture during playback.
•Blocks of noise appear during playback. For details, pg. 53.
●If Stop mode continues for 5 minutes when power is supplied from a battery, the player shuts off automatically. To turn on again, set the Power Switch to “OFF”, then “ON”.
●The playback picture can be viewed in the LCD monitor or on a connected TV. ( pg. 20)
●LCD monitor indications:
•When power is supplied from a battery: the
“
” battery indicator is displayed. ( pg. 49)
•When power is supplied from an AC outlet: the
“
” battery indicator does not appear.
●When a cable is connected to the S2, AUDIO (L/ R), VIDEO or headphone connector, sound cannot be heard from the speaker.
To control the speaker volume…Rotate the VOLUME Wheel towards “+” to turn up the volume, or towards
Pauses during video playback.
1)Press 4/9 during playback.
2)To resume normal playback, press 4/9 again.
●If still playback continues for more than about 3 minutes, the player’s Stop mode is automatically engaged.
●When 4/9 is pressed, the image may not pause immediately while the player stabilizes the still image.
Allows
1)Press 4/9 during playback.
2)Press R for forward and T for reverse.