SYSTEM CONNECTIONS | EN 43 |
Connection To A Personal Computer[A] Using USB cableTo USB connector
USB cable (provided)PC
| To USB | OR |
| i.LINK cable | To i.LINK |
| (optional) | connector |
| PC with i.LINK |
To i.LINK | connector |
[A] Using USB cable
It is possible to do the following things:
●Transfer still images stored on a memory card to a PC.
[B] Using i.LINK cable
It is also possible to transfer still/moving images to a PC with an i.LINK connector by using the software equipped with the PC or commercially available software.
●Set “i.LINK OUT” to “SW”. ( pg. 30)
●Set the i.Link Output Select Switch on this player to the appropriate mode ( pg. 35);
“DV”: when using the DV editing software
“MPEG2”: when using the MPEG2 editing software
●Set the i.Link Output Select Switch to the appropriate mode before connecting the i.Link cable.
NOTES:
●It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack. ( pg. 12)
●Never connect the USB cable and the i.LINK cable simultaneously to the player. Connect only the cable you wish to use to the player.
●Do not connect the player through a hub.●When using an i.LINK cable, be sure to use the optional JVC
●If the PC connected to the player via the USB cable is not powered, the player does not enter the USB mode.
●The date/time information cannot be captured into the PC.
●Refer to the instruction manuals of the PC and Software.
●The still images can also be transferred to a PC with an i.LINK
●The system may not work properly depending on the PC or capture board you are using.
“USB MODE” and/or “ACCESSING FILES” appears on the LCD monitor while the PC is accessing data in the player or the player is transferring a file to the PC.
NEVER disconnect the USB cable while “ACCESSING FILES” is displayed on the LCD monitor since this can result in product damage.