PLAYBACK MENUS

 

 

 

 

 

EN 29

 

 

 

Video Menu

 

 

 

Recording mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Allows you to set the video recording mode (SP or

 

 

 

 

VIDEO

 

 

 

LP) depending on your preference. It is

 

 

 

 

 

 

 

recommended you use “REC MODE” in VIDEO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu when using this player as a recorder during

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Playback sound

 

 

 

dubbing. ( pg. 34, 36)

 

 

 

 

REC MODE

(Factory-preset: SP)

During tape playback, the player detects the sound

 

SP / LP

 

mode in which the recording was made, and plays

 

 

 

 

 

 

the sound back. Select the type of sound to

Dubbing from tape to memory card

accompany your playback picture. According to the

 

 

 

 

 

 

menu access explanation on page 28, select

 

 

 

 

COPY

(Factory-preset: ON)

 

 

 

 

“SOUND MODE” or “DV NARR.” from the Menu

 

OFF: When the SNAP SHOT button is pressed

Screen and set it to the desired parameter.

 

 

during tape playback, the playback image pauses

SOUND MODE

(Factory-preset: STEREO

 

)

 

 

 

and normal playback will resume after

 

 

 

 

STEREO

 

 

: Sound is output from both “L” and

 

approximately 6 seconds. (The still image is not

 

 

 

 

 

 

 

“R” channels in stereo.

 

recorded.)

 

 

 

 

SOUND L

 

 

 

 

: Sound from the “L” channel is

 

ON: Enables dubbing of images recorded on a

 

 

 

 

 

 

 

 

 

output.

 

 

 

 

tape to a memory card. ( pg. 38)

 

 

 

SOUND R

 

 

: Sound from the “R” channel is

Deleting thumbnail images

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

output.

 

 

 

 

DV NARR.

(Factory-preset: OFF)

For details, refer to “To delete thumbnail images”

 

 

 

OFF: Original sound is output from both “L” and

( pg. 33).

 

 

 

 

“R” channels in stereo.

NAVI.DEL.

 

 

 

 

ON: Dubbed sound is output from both “L” and

 

IMAGE SEL. / TAPE SEL. / ALL / RETURN

 

 

 

“R” channels in stereo.

 

 

 

 

 

 

MIX: Original and dubbed sounds are combined and output in stereo on both “L” and “R” channels.

NOTES:

●The “SOUND MODE” setting is available for both 12-bit and 16-bit sound. (In previous models’ functions, “12-bit” is called “32 kHz” and “16-bit” is called “48 kHz”.)

●The player cannot detect the sound mode in which the recording was made during fast-forward or rewind. During playback the sound mode is displayed in the upper left corner.

S-Video/AV input

S/AV INPUT

(Factory-preset: OFF)

OFF: Enables audio and video signal output to a TV, VCR, etc. via the AUDIO (L/R) and VIDEO or AUDIO (L/R) and S2 connectors. ( pg. 20, 36)

ON: Enables audio and video signal input from the AUDIO (L/R) and VIDEO connectors, or audio and S-video signal input from the AUDIO (L/R) and S2 connectors. ( pg. 34)

NOTE:

When VIDEO and S2 connectors are simultaneously connected, S-video signal is input from the S2 connector.