Connections To A TV Or VCR | 1 Make sure all units are turned off. | ||
2 Connect the camcorder to a TV or VCR as | |||
|
| ||
|
| shown in the illustration. | |
|
| If using a VCR, go to step 3. | |
|
| If not, go to step 4. | |
|
| 3 Connect the VCR output to the TV input, | |
To AV |
| referring to your VCR’s instruction manual. | |
connector |
| 4 Turn on the camcorder, the VCR and the TV. | |
Audio/Video | Open the cover. | ||
cable |
| 5 Set the VCR to its AUX input mode, and set | |
(provided) |
| the TV to its VIDEO mode. | |
1
2
3
TV
VCR
A Yellow to VIDEO IN (Connect when your TV/ VCR has only A/V input connectors.)
B Red to AUDIO R IN* C White to AUDIO L IN*
* Not required for watching still images only.
6 Start playback on the camcorder. ( pg. 20)
To choose whether or not the following displays appear on the connected TV
●Date/Time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 22, 27)
●Time Code
Set “TIME CODE” to “ON” or “OFF”. ( pg. 22, 27)
●Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 22, 27)
NOTES:
●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 13)
●To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s Power Switch to “A” or “M”, then set your TV to the appropriate input mode.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.