MENUS FOR DETAILED ADJUSTMENT

EN 25

 

 

SYSTEM

 

 

 

 

 

 

 

 

 

 

 

PRIORITY

 

 

 

The “s SYSTEM” functions which are set when

 

[LCD]: The image is displayed on the LCD

the Power Switch is set to “M” are also applied

 

monitor when the viewfinder is pulled out while

when the Power Switch is set to “PLAY”.

 

the LCD monitor is opened.

[ ] = Factory-preset

 

FINDER: The image is displayed in the

 

 

 

 

 

viewfinder when the viewfinder is pulled out

BEEP

 

 

while the LCD monitor is opened.

OFF: Even though not heard while shooting,

 

 

 

 

 

CAM RESET

 

 

shutter sound is recorded on the tape.

 

 

 

EXECUTE: Resets all settings to the factory-

BEEP: The beep sounds when the power is

 

turned on or off, and at the beginning and end of

 

preset.

recording. It also activates the shutter sound

 

[RETURN]: Does not reset all settings to the

effect. ( pg. 29)

 

factory-preset.

[MELODY]: Instead of a beep, a melody sounds

 

 

 

 

when any operation is performed. It also

 

 

 

 

activates the shutter sound effect. ( pg. 29)

 

 

 

 

 

 

 

 

 

 

 

 

REMOTE

 

 

 

 

 

OFF: Disables the remote control operations.

[ON]: Enables the remote control operations. It is recommended that this function be set to “OFF” to prevent improper operation.

DEMO MODE

OFF: Automatic demonstration will not take place.

[ON]: Demonstrates certain functions such as Program AE with special effects, etc., and can be used to confirm how these functions operate. Demonstration starts in the following cases:

●When the Menu Screen is closed after “DEMO MODE” is turned “ON”.

●With “DEMO MODE” set to “ON”, if there is no operation for about 3 minutes after the Power Switch is set to “A” or “M”.

●Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.

NOTES:

●If a cassette is in the camcorder, the demonstration cannot be turned on.

●“DEMO MODE” remains “ON” even if the camcorder power is turned off.

●If “DEMO MODE” remains “ON”, some functions will not be available. After viewing demo, set to “OFF”.