INTRODUCTION | EN 3 |
CAUTION:
●Operate this equipment according to the operating procedures described in this manual.
●Use only the provided
●Do not attempt to modify this software.
●Changes or modifications not approved by JVC could void user’s authority to operate the equipment.
ATTENTION:
When connecting a USB cable to PC
●Never switch the recording/playback mode on the camera when the USB cable is connected. It may cause the camera not to be recognized by the PC. If it occurs, confirm that the PC is not accessing the camera, then disconnect the USB cable and connect it again.
●Never turn on or off the camera when the USB cable is connected. It may cause malfunctions of the PC.
How to handle a●Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything or put a sticker on either the front or back surface. If the
●Do not use conventional disc cleaners or cleaning spray.
●Do not bend the
●Do not store your
You can find the latest information (in English) on the provided software program at our world wide web server at
●Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
●Macintosh is a registered trademark of Apple Computer, Inc.
●Other product and company names included in this instruction manual are trademarks and/or registered trademarks of their respective holders.
Reading this document
This document consists of the following sections.
Before use, please read “SOFTWARE INSTALLATION AND USB CONNECTION GUIDE” for preparation.
Digital Photo Navigator
This section explains how to load still images into the album of the Digital Photo Navigator and how to handle still images using the Digital Photo Navigator software. You can send still images by