ADDING STILL IMAGES TO AN ALBUM (cont.)

EN 7

6Add additional still images as desired by repeating steps 3 – 5.NOTES:

●When loading images from a recording medium, never disconnect the USB cable while the message [ACCESSING FILES] is displayed in the camera’s LCD monitor.

●Digital Photo Navigator can only load still images. Digital Photo Navigator cannot load video files.

7Click [Export].8Click [Album].

The [Save As] dialog box appears.

9Specify the location where you want to save the album, enter the file name of the album, and then click [Save].

The album is saved.

●If you save an album for the first time after the software installation, a message appears and asks if you want to register the association of the file extension name “jia”. Then, click [Yes].

●To exit Digital Photo Navigator, refer to “EXITING DIGITAL PHOTO NAVIGATOR” (See below).

EXITING DIGITAL PHOTO NAVIGATOR

1Click the [File] menu and then click [Exit].

●If you have already saved an album, a confirmation message appears. Then, go to step 2.

●If you have not saved an album after loading still images, a confirmation message appears.

To save an album, click [Yes]. The [Save As] dialog box appears. Specify the location where you want to save the album, enter the file name of the album, and then click [Save]. A confirmation message appears. Then, go to step 2.

To exit Digital Photo Navigator without saving an album, click [No]. A confirmation message appears. Then, go to step 2.

2Click [Yes].

Digital Photo Navigator closes.