Preparing the Camera for Bluetooth connection

When using Blackberry

Configure the setting below to use the GPS function.

11 Press the menu key and select [Options] - [Advanced Options] - [GPS].

22 Set [GPS Data Source] to [Device GPS].

33 Set [GPS Service] to [Location ON].

44 Press the menu key and select [Save].

When using Touch Pro/Touch Diamond

Register the camcorder after pairing following the steps below. * If you use HD2, the following operation is not required.

11 Select [Start] - [Settings].

22 Open [Connection] and select [Bluetooth].

33 Open [Devices] and select a camcorder to connect to.

44 Tick the [Serial port] checkbox and tap [Save].

55 Open the [COM Ports] tab and select [New Outgoing Port]. 66 Select a camcorder to connect to and tap [Next].

77 Select the [COM 0] port.

88 Remove the tick in the [Secure Connection] checkbox and tap [Finish].

If [COM 0] is already in use, select the port which has the next youngest number. If you cannot register, select the next port and try again.

99 Tap [OK] on the upper right to close the setting screen.

11