30
Troubleshooting
No power is applied to the Player. mIs the power cord disconnected?
– Connect it.
Remote control does not function. mAre the batteries discharged?
– Replace with new ones.
Disc tray does not come out when OPEN/ mIs the power cord disconnected?
CLOSE button is pressed. – Connect it.
Sound is distorted or noise is generated. mIs the disc dirty?
Image is garbled. – Wipe off the disc surface with a soft cloth.
mIs the correctly connected?
Sound is intermittent. mIs the disc dirty?
Image is garbled. – Wipe the disc surface with a soft cloth. ( Z p.4)
mIs the disc scratched?
mIs the disc warped?
– Replace the disc with a new one.
No image is displayed on the monitor. mIs the monitor set to the AV mode?
– Set it to the AV mode.
Noise appears during visual search. mThis is normal.
Noise appears during normal or slow-motion mIs the automatic tracking mode engaged?
playback. – Try manual tracking. ( Z p.19)
No sound from the microphone is heard. mIs the microphone volume adjusted at the lowest level? ( Z p.25)
Recording does not function. mIs a cassette loaded?
mIs the safety tab on the cassette removed?
– Reseal the slot with adhesive tape.
Tape-to-tape editing or camera recording is not mIs the camcorder or another video recorder correctly connected?
possible. mAre all necessary power switch turned ON?
Whistling or howling is heard from TV during mMove camcorder or camera’s microphone away from TV or reduce
camera recording. TV sound volume.
The Player does not function properly. mMicrocomputer malfunction. Disconnect the power plug from the
AC outlet and then re-insert it.
The microcomputer will be reset to its initial mode.
Symptoms Check point