Continued

 

 

Programming the Playing Order of the Tracks

5 Program other tracks you want.

—–Program Play

• To program tracks from the same disc, repeat step 4.

 

• To program tracks from a different disc, repeat steps 3

You can arrange the order of the tracks to playback while in

and 4.

stop mode. You can program up to 32 tracks.

 

English

Program play is not available to MP3/WMA discs on this unit

If a track in an MP3/WMA disc is attempted to be programmed, the track will not be played back, and erased from the stored memory.

On the remote control ONLY:

1 Load CDs.

•If the current playing source is not CD, press CD 6, then 7 before going to the next step.

2 Press PROGRAM so that “PROGRAM” appears on the display.

The PROGRAM indicator also lights up on the display.

•All disc playback is selected automatically.

You cannot select One disc playback for Program play.

PROGRAM indicator

•If a program has been stored in memory, the program is called up.

3 Press one of the disc number buttons (DISC1, DISC2, and DISC3) to select the disc number you want to play.

Disc number

Track number Program step number

6 Press CD 6 .

The tracks are played in the order you have programmed.

To stop Program play, press 7.

The Program play is canceled and the unit enters All disc playback.

(The program you have made is stored in memory until you turn off the unit, eject the carrousel, or erase the program.)

• Program play is also canceled when you press 0.

To use Repeat play (see page 19) for Program play, press

REPEAT after starting Program play.

To modify the program

While in program mode, you can erase the last programmed track shown on the display by pressing CANCEL while the playback is stopped.

•Each time you press the button, the last programmed track is erased from the program.

To add tracks in the program while in stop mode, simply select the disc numbers and/or track numbers you want to add by following steps 3 and 4 of the programming procedure.

To check the program while in stop mode, press ¢/`, 4 / 1 .

The programmed tracks appear on the display in the programmed (or reverse) order.

•Pressing CD 3 (CD 6 on the remote control) starts Program play from the first track of the program.

4 Press the number button(s) to enter the desired track number.

To erase the entire program, press 7 while in the program mode and the Program play is stopped.

•Unplugging the AC power cord or ejecting the carrousel will also erase the stored memory.

Turning the power off will not erase the stored memory.

If you program a track from an empty tray, or a track number that does not exist on the disc

Such program steps will be ignored and erased from the program.

18