JVC MX-GB5 Unpacking, Connecting Antennas, Putting the Batteries into the Remote Control, English

Getting Started	have been made.	Continued
	Do not connect the AC power cord until all other connections

English

Unpacking

After unpacking, check to be sure that you have all the following items.

The number in the parentheses indicates the quantity of the pieces supplied.

•AM loop antenna (1)

•FM antenna (1)

•Remote control (1)

•Batteries (2)

•AC plug adaptor (1)

If any is missing, consult your dealer immediately.

Connecting Antennas

FM antenna

FM antenna (supplied)

ANTENNA AM

FM [75 ]

Putting the Batteries into the Remote Control

Insert the batteries—R6P(SUM-3)/AA(15F)—into the remote control, by matching the polarity (+ and –) on the batteries with the + and – markings on the battery compartment. When the remote control can no longer operate the unit, replace both batteries at the same time.

1

2 R6P(SUM-3)/AA(15F)

3

•DO NOT use an old battery together with a new one.

•DO NOT use different types of batteries together.

•DO NOT expose batteries to heat or flame.

•DO NOT leave the batteries in the battery compartment when you are not going to use the remote control for an extended period of time. Otherwise, it will be damaged from battery leakage.

1Attach the FM antenna to the FM [75 Ω] coaxial terminal.

2Extend the FM antenna.

3Fasten it up in the position which gives you the best reception, then fix it on the wall, etc.

About the supplied FM antenna

The FM antenna supplied with this unit can be used as temporary measure. If reception is poor, you can connect an outdoor FM antenna.

To connect an outdoor FM antenna

Before connecting it, disconnect the supplied FM antenna.

Outdoor FM antenna
(not supplied)
		ANTENNA	AM
FM	[75	]
A 75 Ω antenna with coaxial type connector should be
used.
			6