JVC MX-GT70 manual Playing Back the Entire Discs Continuous Play, Basic CD Operations

Continued

Playing Back the Entire Discs

— Continuous Play

1 Load CDs.

2 Press one of the disc number buttons (CD1, CD2, and CD3) for the disc you want to play.

CD play starts from the first track of

the selected disc and the disc number lamp starts flashing.

Tracks of the currently playing disc

(Track numbers exceeding 16 are not displayed.)

Track number Elapsed playing time

•Pressing CD 3/8instead of the disc number buttons starts playing back if a CD is on the trays.

•If no CD is placed on the selected disc tray, “NO DISC” appears on the display.

To stop playing, press 7.

To remove the disc, press 0for the corresponding disc tray.

CD playback sequence

When 3 CDs* are loaded on the disc trays, they are played in one of the following sequences.

•When CD1 is pressed: CD1 ]CD2 ] CD3 (then stops)

•When CD2 is pressed: CD2 ]CD3 ] CD1 (then stops)

•When CD3 is pressed: CD3 ]CD1 ] CD2 (then stops)

*When only 2 CDs are loaded, they are played in the same order, but the disc tray without a CD is skipped.

Basic CD Operations

While playing a CD, you can do the following operations.

To exchange CDs during playback of another

Press 0 corresponding to a CD, not playing or selected currently, to eject and exchange the CD.

If you exchange CDs during play, the current play will not stop until all CDs you have exchanged are played.

To stop play for a moment

Press CD 3´8.

While pausing, the elapsed playing time flashes on the display.

To resume playing, press CD 3´8.

To go to another track

Turn 4/ ¢before or during playback (or press 4 / ¢on the remote control).

•4: Goes back to the beginning of the current or previous tracks.

•¢: Skips to the beginning of the next or succeeding tracks.

If you turn 4/ ¢(or press 4/ ¢ on the remote control) before playing

You can change the tracks continuously.

To locate a particular point in a track

During play, press and hold 1or Á (or 4/ ¢ on the remote control).

•1 (or 4): Fast reverses the disc.

•Á(or ¢): Fast forwards the disc.

To go to another track directly using the number buttons

Pressing the number button(s) on the remote control before or during play allows you to start playing the track number you want.

Ex.: For track number 5, press 5. For track number 15, press +10,

then 5. For track number 20, press +10,

then 10. For track number 32, press +10,

+10, +10, then 2.

– 14 –