English
Common Operations
Turning On or Off the Power | 3 Press 4 or ¢ to adjust the |
| minute, then press SET. |
|
To turn on the unit, press 
STANDBY/ ON so that the STANDBY lamp goes off.
To turn off the unit (on standby), press
STANDBY/ON again so that the STANDBY lamp lights up.
STANDBY
STANDBY/ON
SET
STANDBY
STANDBY/ON
A little power is always consumed even while the unit is on standby.
To switch off the power supply completely, unplug the AC
power cord from the AC outlet.
When you unplug the AC power cord or if a power failure occurs
The clock is reset to “–
Setting the Clock
Before operating the unit any further, first set the clock built in this unit. You can set the clock whether the unit is on or off.
To check the clock time
Press DISPLAY while playing any source. | DISPLAY |
|
•Each time you press the button, the source indication and the clock time alternate on the display.
To adjust the clock again
If you have adjusted the clock before, you need to press CLOCK/TIMER repeatedly until “CLOCK” is selected.
•Each time you press the button, the clock/timer setting modes change as follows:
DAILY 
ON TIME 
REC
(Daily Timer)
Canceled 
CLOCK 
ON TIME 
(Recording Timer)
If there is a power failure
The clock loses the setting and is reset to “–
On the unit ONLY:
1 | Press CLOCK/TIMER. | CLOCK | |
/TIMER | |||
|
|
The hour digits start flashing on the display.
2 Press 4or ¢ to adjust the hour, then press SET.
The minute digits start flashing on the display. | SET |
• If you want to correct the hour after pressing SET, press CANCEL/DEMO. The hour digits start flashing again.
– 9 –
