Repeat Play

Press repeatedly before you start playback to specify the repeat mode as follows:

1 Repeats the current track.

1ALL Repeats all tracks.

GR Repeats all tracks in the current group. Cancel

2

Start playback.

Random Play

RND appears on the display before you start

1 playback.

• To cancel, press again.

Playback starts in random order.

2 Random Play ends when all tracks are played.

• To repeat random play, press REPEAT.

Playing Back from the PC

This System is equipped with a USB AUDIO terminal on the rear panel. You can connect your PC to this terminal and enjoy the sound from your PC. When you connect your PC for the first time, follow the procedure below.

How to install the USB drivers

 

To playback sounds on the PC

Turn on your PC and start running Windows ® 98SE, Windows ® Me, Windows ® 2000, or Windows ®

1 XP.

•If the PC has been turned on, close all the applications running.

 

Select USB AUDIO for the source.

2

 

 

USB AUDIO

 

 

 

 

 

 

AUX

 

 

 

 

 

• USB AUDIO can be selected also by the FUNCTION button on the unit.

Connect the System to the PC using a USB cable (not supplied).

 

(rear panel)

PC

 

 

3

USB cable

 

 

(not supplied)

 

 

• Use “USB series A plug to B plug” cable.

4

The USB drivers are installed automatically.

NOTE

•Always set volume to the minimum level when connecting or disconnecting the other equipment.

Refer to the manuals supplied with the media player application installed on the PC.

*Microsoft ®, Windows ® 98SE, Windows ® Me, Windows ® 2000 and Windows ® XP

are registered trademarks of Microsoft corporation.

NOTES

•You cannot send any signal or data to your PC from this System.

•DO NOT turn off the unit or disconnect the USB cable while installing the drivers and for several seconds while your PC is recognizing the receiver.

•Use a full speed USB cable (version 1.1).

Recommended cord length is shorter than approximately 2 m.

•If your PC does not recognize the unit, disconnect the USB cable and connect it again. If it does not work yet, restart Windows.

•The installed drivers can be recognized only when the USB cable is connected between the unit and your PC.

•The sound may not be played back correctly— interrupted or degraded—due to your PC settings and PC specifications.

10