Playing Back from Other Equipment

To connect other equipment

By using a stereo mini plug cord (not supplied), you can connect other equipment with analog audio output jacks, such as Digital Audio Player, a TV, etc.

Stereo mini plug cord (not supplied)

AUX

 

Portable audio

 

 

device, Game

 

(front panel)

machine, etc.

 

 

To select other equipment for the source

Select AUX for the source.

USB AUDIO

AUX

•AUX can be selected also by the FUNCTION button on the unit.

To adjust the sound input level from other equipment

You can adjust the sound input level from the connected equipment, if the incoming signal is too small or too large.

• Refer to the manuals supplied with the other equipment.

NOTE

•Always set volume to the minimum level when connecting or disconnecting the other equipment.

1

Select AUX for the source.

 

 

 

 

 

 

 

 

 

2

Press and hold until the indicator appears on the

display. Then press and hold until setting is changed.

 

 

 

 

LEVEL 1

 

 

 

 

 

 

 

 

 

 

 

 

 

LEVEL 2

 

 

 

 

 

 

 

LEVEL 1:

Decreased input level. Suitable for equipment with high output level (such as a DVD player).

LEVEL 2:

Ordinary input level (factory setting).

Suitable for equipment with low output level (such as a portable audio device).

Troubleshooting

If you are having a problem with your System, check this list for a possible solution before calling for service.

General:Power does not come on.

Power plug is not inserted securely. Plug in securely.

Adjustments or settings are suddenly canceled before you finish.

There is a time limit. Repeat the procedure again.

Operations are disabled.

The built-in microprocessor may malfunction due to external electrical interference. Unplug the AC power cord and then plug it back in.

Unable to operate the System from the remote control.

The path between the remote control and the remote sensor on the System is blocked.

Point it at the remote sensor on the font panel. Signals cannot reach the remote sensor. More closer to the System.

The batteries are exhausted.

No sound is heard from the speakers.

Speaker connections are incorrect or loose (P.4). Headphones are connected (P.5).

Sound from PC connected with a USB cable has some noise. (P.10)

PC is subjected to excessive load due to using other applications. Close the applications you do not use. PC is connected via USB Hub. Connect the PC directly to the main unit with a USB cable.

iPod/USB mass storage class device Operations:The iPod doesn’t playback although the display indicates CONNECT.

The battery is empty. Let stand for more than approximately ten minutes on the connecting condition.

Timer Operations:Daily Timer does not work.

The System has been turned on when the ontime comes. Timer starts working only when the System is turned off.

There might have been a power failure. Set the clock first, then the timer again.

11