English | You can use Normal or Repeat Play. Repeat Play can be set to repeat | |
(AC power only) | ||
| all or just one of the tracks on the CD. | |
| One Touch CD Player | |
| ■ Just press the CD 6 button. | |
| • The power is automatically turned on. If a CD is already | |
| inserted, “PLAY” is displayed and the CD will start play- | |
| ing from the first track. |
|
| • If no CD is inserted, “NO DISC” is displayed on the dis- | |
| play and the CD Player remains in Stop mode. | |
Normal Play
■1. Press the CD OPEN button on the Unit.
The CD holder opens.
■2. Place a CD, with its label side up. ■3. Gently close the CD holder by hand. ■4. Press the CD 6 button.
The first track of the CD begins playing .
The CD Player automatically stops when the last track of the CD has finished playing.
•During playback, the track number being played and the play-
back time elapsed are shown on the display. To stop playing the CD, press the 7 button. The following information for the CD is displayed.
Total number of tracks
Playback time elapsed
To pause, press the CD 6.
To cancel pause, press the CD 6 again. Play continues from the point where it was paused.
Notes:
•You can place an 8 cm (3'') CD without an adaptor.
•If the CD cannot be read correctly (because it is scratched, for example), “000000” appears on the display.
•Even if other function is selected during playing the CD, the last track is memorized.
Skip Play (4 or ¢) ————————
During playback, press the 4 or ¢ button to select the track you want.
The selected track starts playing.
•Press and release the ¢ button to go forward one track at a time.
•Press and release the 4 button to go back one track at a time.
Search Play —————————————
During playback, hold down the 4 or ¢ button.
This operation will fast forward/backwards the CD so you can quickly find a particular passage in the track you are listening to (the CD is played slowly for a moment and then the playback speed in- creases).
Locating a Track directly with the Remote Control ———————————
Using the number keys on the Remote Control allows you can go directly to the beginning of any track.
During playback, enter the number of the track you want to listen to using the number keys.
The selected track starts playing.
•Example: For track 5, press 5. For track 15, press +10 then 5. For track 20, press +10, then 10. For track 32, press +10 three times, then 2.
Repeat Play
You can repeat one track or all the tracks on a CD.
During, or before playback, press the REPEAT button to select the Repeat mode.
The Repeat indicator changes with each press of the button, as shown below.
= 
ALL =blank display = (back to the beginning)
: Repeats one track.
ALL : Repeats all the tracks.
To exit Repeat mode, press the REPEAT button until the Repeat indicator on the display goes out.
■Using the Cassette Deck (Listening to a Tape)
8 | TAPE PLAY |
¤ |
1Á
The Cassette Deck allows you to play and record audio tapes
Notes:
•The Cassette Deck performs best with normal tapes (metal or CrO2 tapes are not recommended).
•The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may occur and these tapes easily jam in the
(Display when using the Cassette Deck)
One Touch Play (AC power only) —
Just press the TAPE PLAY button on the Unit. The power is auto- matically turned on, “TAPE” is displayed, and if a tape is already in the deck, it will start to play.
6
