■Troubleshooting
•If you have a problem with your System, check this list for a possible solution before calling for service.
•If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as your dealer, for service.
Symptom
No sound is heard.
Poor AM reception
Poor FM reception
The CD skips.
The CD does not play.
Preset tuning is not possible with the 4/¢ key.
Manual tuning is not possible with the 4/¢ key.
Unable to operate the Remote Control.
Operations are disabled.
Possible Cause
•The power cord is disconnected.
•The batteries in the Unit have lost their charge.
•Headphones are connected.
The System is not properly positioned.
The FM antenna is not properly posi- tioned.
The CD is dirty or scratched.
The CD is upside down.
Manual Tuning mode is selected.
Preset Tuning mode is selected.
•The path between the Remote Control and the sensor on the Unit is blocked.
•The batteries have lost their charge.
The
Action
•Connect it firmly
•Replace the batteries.
•Disconnect the headphones.
Turn the System to the best reception position.
Extend the FM antenna and turn it to the best reception position.
Clean or replace the CD.
Put the CD in with the label side up.
Press the ■ button on the Unit until “PRESET” is displayed.
Press the ■ button on the Unit until “MANUAL” is displayed.
•Remove the obstruction.
•Replace the batteries.
Unplug the Unit then plug it back in.
■Specifications
Amplifier |
|
Output Power |
|
(Max.) | 5 W (2.5 W + 2.5 W) at 4 ohms |
(10% THD) | 4 W (2 W + 2 W) at 4 ohms |
Output Sensitivity/Impedance (1 kHz) |
|
Phones | 32 ohms - 1 kohm |
| 0 mW - 20 mW/ch output into 32 ohms |
CD Player |
|
90 dB | |
Wow And Flutter | Unmeasurable |
Tuner |
|
FM Tuner |
|
Tuning Range | 87.5 MHz - 108.0 MHz |
AM Tuner |
|
Tuning Range | 530 kHz - 1,710 kHz |
Antenna | |
| |
Speakers | 8 cm ✕ 2, 4 ohms |
| |
General |
|
Dimensions | 438 mm ✕ 175.5 mm ✕ 261.5 mm (W/H/D) |
Mass | Approx. 2.5 kg (without batteries) |
Accessories | Power Cord (1) |
| |
| Remote Control |
Power Specifications |
|
Power Requirements | AC 120 V ~ , 60 Hz |
Power Consumption | 12 watts (power on mode) |
Design and specifications are subject to change without notice.
12
