Operating Other Manufacturers’ Video Equipment
This remote control supplied for the receiver can transmit control signals for other manufacturers’ TVs, CATV converters, VCRs and DVD players.
When operating the other manufacturers’ components, refer also to the manuals supplied with them.
•After replacing batteries for the remote control, you need to set the manufactures’ codes again.
To change the transmittable signals for operating another manufacturer’s TV1Set the TV/CATV selector to “TV.”2Press and hold STANDBY/ON TV/CATV.3Press TV SOUND.4Enter a manufacturer’s code using buttons 1 – 9, and 0.Manufacturer | Codes |
JVC | 01* |
Hitachi | 10 |
Magnavox | 02 |
Mitsubishi | 03 |
Panasonic | 04, 11 |
RCA | 05 |
Samsung | 12 |
Sanyo | 13 |
Sharp | 06 |
Sony | 07 |
Toshiba | 08 |
Zenith | 09 |
After pressing TV SOUND, you can perform the following operations on the TV:
1 – 9, 0, 100+ (+10):Select the channels.
The 10 (ENTER) button will function as theENTER button if your TV requires pressingENTER after selecting a channel number.Notes:
•All the functions listed above may not be assigned to the buttons for some TVs.
•If you cannot change the channels of some TVs by pressing the number buttons, press TV/CATV CH +/– for changing the channels.
6 Try to operate your TV by pressingSTANDBY/ON TV/CATV.When your TV turns on or off, you have entered the correct code.If there are more than one code listed for your brand of TV,try each one until the correct one is entered.2Press and hold STANDBY/ON TV/CATV.
3Press TV SOUND.
4Enter a manufacturer’s code using buttons 1 – 9, and 0.
Manufacturer | Codes |
Echostar | 01* |
General Instrument | 02, 03, 04, 05, 06, 07, 08, 09 |
Hamlin | 16, 17, 18, 19 |
Pioneer | 14, 15 |
RCA | 20 |
Scientific Atlanta | 10, 11 |
Sony | 21 |
Zenith | 12, 13 |
* “01” is the initial setting.
5 Release STANDBY/ON TV/CATV.
Now you can perform the following operations on the CATV converter:STANDBY/ON TV/CATV:Turn on and off the CATV converter.TV/CATV CH
After pressing TV SOUND, you can perform the following operations on the CATV converter:
1 – 9, 0, 100+ (+10):
Select the channels.
The 10 (ENTER) button will function as the ENTER button if your CATV converter requires pressing ENTER after selecting a channel number.
6 Try to operate your CATV converter by pressingSTANDBY/ON TV/CATV.
When your CATV converter on or off, you have entered the correct code.If there are more than one code listed for your brand of CATV converter, try each one until the correct one is entered.
Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
Continued on the next page
31