Operating Other Manufacturers’ Video Equipment
To change the transmittable signals for operating another manufacturer’s VCR1Press and hold STANDBY/ON VCR.2Press VCR.3Enter a manufacturer’s code using buttons 1 – 9, and 0.

Manufacturer

Codes

JVC

01*, 02, 03

Emerson

10, 22

Gold Star

11

Hitachi

04

Mitsubishi

12

NEC

21

Panasonic

07, 13

Philips

09

RCA

05, 06

Samsung

20

Sanyo

17, 18, 19

Sony

14, 15, 16

Zenith

08

* “01” is the initial setting.

4 Release STANDBY/ON VCR.

Now you can perform the following operations on the VCR:

STANDBY/ON

VCR: Turn on and off the VCR.

VCR CH +/–:

Change the TV channels on the

 

VCR.

After pressing VCR, you can perform the following operations on the VCR:

To change the transmittable signals for operating another manufacturer’s DVD player

1Press and hold STANDBY/ON DVD.2Press DVD.

3Enter a manufacturer’s code using buttons 1 – 9, and 0.

Manufacturer

Codes

JVC

01*

Panasonic

02

Philips

04

Pioneer

03

Sony

05

Toshiba

06

Yamaha

07

* “01” is the initial setting.

4 Release STANDBY/ON DVD.

Now you can perform the following operations on the DVD player:

STANDBY/ON DVD: Turn on and off the DVD player.

After pressing DVD, you can perform the following operations on the DVD player:

3: Start playing.

4: Return to the beginning of the current (or previous) chapter (or fast reverse for some models).

¢: Skip to the beginning of the next chapter (or fast forward for some models).

7: Stop playing.

8: Pause playing. To resume, press 3.

3:

Start playing.

REW:

Rewind the tape.

FF:Fast-forward the tape.

7:Stop playing or recording.

8:Pause playing. To resume, press 3.

REC PAUSE: Enter recording pause.

To start recording, press this button then 3.

5 Try to operate your VCR by pressingSTANDBY/ON VCR.

After pressing DVD, these buttons can be used for the DVD menu operations.

Note:

For detailed menu operations, refer to

the instructions supplied with the discs or the DVD player.

2

46

MENU

7/P 8

ENTER

10

When your VCR turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

VCR, try each one until the correct one is entered.

5 Try to operate your DVD player by pressingSTANDBY/ON DVD.

When your DVD player turns on or off, you have entered the correct code.

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

32