![](/images/new-backgrounds/1046670/4667043x1.webp)
English
MEMORY | 4. | Press MEMORY again while the selected channel number is flashing on the display. |
| ||
|
| The selected channel number stops flashing. The station is assigned to the selected channel number. |
| 5. | Repeat steps 1 to 4 until you store all the stations you want. |
To cancel a stored preset station
Storing a new station on a used number erases the previously stored one.
CAUTION:
The preset channels may be erased in the following cases:
•When you press POWER to set it in the ÑOFF position.
•When you unplug the power cord.
•When a power failure occurs.
Tuning in a Preset Station
TUNER/BAND
FM/AM
1 | PRESET | SEA MODE |
2 | 3 | |
TEST | DELAY SURR MODE | |
4 | 5 | 6 |
–REAR +
7/P 8 9
– CENTER +
10 +10
On the front panel:
1.Press TUNER/BAND so that the Control %/ Þ/ @ / # buttons work for tuner settings. The lamp above the button lights up.
2.Press Control % / Þuntil
3.Press Control @/ # to select a preset channel.
Each time you press the button, the preset channels change.
•Pressing Control @changes preset channel in decreasing order.
•Pressing Control #changes preset channels in increasing order.
From the remote control:
1.Press FM/AM.
The last received station of the last selected band is tuned in.
Each time you press the button, the band alternates between FM and AM (MW/LW).
2.Press 10 keys to select a preset channel number.
For channel number 5, press 5. For channel number 15, press +10 then 5.
For channel number 20, press +10 then 10. For channel number 30, press +10, +10 then 10.
Page 17