![](/images/new-backgrounds/1046670/4667079x1.webp)
English
Specifications
Amplifier
Output Power | At Stereo Operation |
|
| Front Channels | 55 watts per channel, min. RMS, driven into 4 ohms at 1 kHz with |
|
| no more than 0.9% total harmonic distortion. |
|
| 30 watts per channel, min. RMS, driven into 8 ohms at 1 kHz with |
|
| no more than 0.9% total harmonic distortion. |
|
| 30 watts per channel, min. RMS, driven into 8 ohms, 40 Hz to 20 |
|
| kHz with no more than 0.8% total harmonic distortion. |
| At Surround Operation |
|
| Front Channels | 50 watts per channel, min. RMS, driven into 8 ohms at 1 kHz with |
|
| no more than 0.8% total harmonic distortion. |
| Center Channel | 50 watts, min. RMS, driven into 8 ohms at 1 kHz, with no more |
|
| than 0.8% total harmonic distortion. |
| Rear Channels | 50 watts per channel, min. RMS, driven into 8 ohms at 1kHz, with |
|
| no more than 0.8% total harmonic distortion. |
Total Harmonic Distortion |
| 0.8 %* at 30 watts output |
(8 ohms, 1 kHz) |
| (* Measured by JVC Audio Analysis System) |
Frequency Response (8 ohms) | PHONO | 20 Hz to 20 kHz (±1 dB) |
| CD, TAPE, VCR, VIDEO | 20 Hz to 20 kHz (±1 dB) |
Audio Input Sensitivity/ | PHONO (MM) | 2.5 mV/47 k ohms |
Impedance (1 kHz) | CD, TAPE, VCR, VIDEO | 200 mV/47 k ohms |
Audio Output Level | TAPE, VCR | 200 mV |
PHONO | 70 dB/66 dB | |
(’66 IHF/DIN) | CD, TAPE, VCR, VIDEO | 87 dB/67 dB |
RIAA Phono Equalization |
| ±0.5 dB (20 Hz to 20 kHz) |
Loudness |
| +5 ± 2 dB at 100 Hz |
(Volume Control at |
|
|
Video Input Sensitivity/ | VCR, VIDEO | 1 |
Impedance |
|
|
Video Output Level | VCR, MONITOR OUT | 1 |
Synchronization |
| negative |
| 45 dB |
Page 35