JVC RX-6012VSL manual Specifications, English, Amplifier, Audio, Video

English

Specifications

Amplifier

Output Power
At Stereo operation:
Front channels:	100 W* per channel, min. RMS, both channels driven into 8 Ω at
	1 kHz with no more than 0.9% total harmonic distortion.
	(IEC268-3/DIN)
At Surround operation:
Front channels:	100 W* per channel, min. RMS, driven into 8 Ω at 1 kHz with no
	more than 0.8% total harmonic distortion.
Center channel:	100 W*, min. RMS, driven into 8 Ω at 1 kHz, with no more than
	0.8% total harmonic distortion.
Rear channels:	100 W* per channel, min. RMS, driven into 8 Ω at 1 kHz, with
	no more than 0.8% total harmonic distortion.

	(* Measured on AC 110 V, 127 V, 220 V and 240 V)
Audio
Audio Input Sensitivity/Impedance (1 kHz):	CD, TAPE/CDR, TV SOUND, VCR, DVD:		220 mV/47 k Ω
Audio Input (DIGITAL IN)* :	Coaxial: DIGITAL 1	(DVD):	0.5 V (p-p)/75 Ω
	Optical: DIGITAL 2	(CD):	–21 dBm to –15 dBm (660 nm ±30 nm)

*Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).

Audio Output Level:	TAPE/CDR, VCR:		220 mV
Signal-to-Noise Ratio (’66 IHF/DIN):	CD, TAPE/CDR, TV SOUND, VCR, DVD:		87 dB/67 dB
Frequency Response (8 Ω):	CD, TAPE/CDR, TV SOUND, VCR, DVD:		20 Hz to 20 kHz (±1 dB)
Tone Control:	Bass (100 Hz):	±10 dB
	Treble (10 kHz):	±10 dB
Video
Video Input Sensitivity/Impedance:
Composite video:	VCR, DVD:		1 V (p-p)/75 Ω
Video Output Level:
Composite video:	VCR, MONITOR OUT:		1 V (p-p)/75 Ω
Synchronization:	Negative
Signal-to-Noise Ratio:	45 dB

29