Getting Started
This section explains how to connect audio/video components and speakers to the receiver, and how to connect the power supply.
Before Installation
General
•Be sure your hands are dry.
•Turn the power off to all components.
•Read the manuals supplied with the components you are going to connect.
Locations
•Install the receiver in a location that is level and protected from moisture.
•The temperature around the receiver must be between
•Make sure there is good ventilation around the receiver. Poor ventilation could cause overheating and damage the receiver.
Handling the receiver
•Do not insert any metal object into the receiver.
•Do not disassemble the receiver or remove screws, covers, or cabinet.
•Do not expose the receiver to rain or moisture.
Checking the Supplied Accessories
Check to be sure you have all of the following items, which are supplied with the receiver.
The number in the parentheses indicates the quantity of the pieces supplied.
•Remote Control (1)
•Batteries (2)
•AM Loop Antenna (1)
•FM Antenna (1)
If anything is missing, contact your dealer immediately.
Connecting the FM and AM Antennas
FM Antenna Connections
A |
| AN | TENNA | M 75L |
| B |
| ANTENNA | M | 75L |
| ||||
|
|
| F |
| AXIA |
|
|
|
| F |
| AXIA |
|
| |
|
|
| CO |
|
|
|
|
| CO |
|
|
|
| ||
| A | M |
|
| A | M |
| A | M |
|
| A | M | ||
| OP |
|
| EX | T |
| OP |
|
| EX | T | ||||
| LO |
|
|
|
| LO |
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
FM Antenna
ANTENNA Extend the supplied FM antenna horizontally.
FM 75
COAXIAL
AM | Outdoor FM Antenna Cable |
LOOP |
|
AM
EXT
A.Using the Supplied FM Antenna
The FM antenna provided can be connected to the FM 75 Ω COAXIAL terminal as temporary measure.
B.Using the Standard Type Connector (Not Supplied)
A standard type connector should be connected to the FM 75 Ω COAXIAL terminal.
Note:
If reception is poor, connect an outdoor antenna.
Before attaching a 75 Ω coaxial cable (the kind with a round wire going to an outdoor antenna), disconnect the supplied FM antenna.
3
