JVC RX-D211S, RX-D212B ❏Changing the transmittable signals for operating a DVD player, ❏Changing the transmittable signals for operating a CATV converter or DBS tuner, 23, 31, 38, 03

❏Changing the transmittable signals for operating a CATV converter or DBS tuner

1Press and hold DBS/CATV .2Press DBS.

3Enter the manufacturer’s code using buttons 1 – 9, and 0.

See “Manufacturers’ codes for CATV converter” or “Manufacturers’ codes for DBS tuner” below.

4Release DBS/CATV .

Now, you can perform the following operation on the CATV converter or DBS tuner.

DBS/CATV : Turn on or off the CATV converter or

DBS tuner.

After pressing DBS, you can perform the following operations on the CATV converter or DBS tuner.

CHANNEL +/–:Change the channel numbers on the CATV converter or DBS tuner.

1 – 10, 0:Select the channel numbers on the CATV converter or DBS tuner.

See the instructions supplied with the CATV converter or DBS tuner for details.

5Try to operate your CATV converter or DBS tuner by pressing DBS/CATV .

When your CATV converter or DBS tuner turns on or off, you have entered the correct code.

If more than one code is listed for your brand of CATV

converter or DBS tuner, try each one until the correct one is entered.

Manufacturers’ codes for CATV converter

Manufacturer	Codes
G.I.	01
Gemini	02
Hamlin	03, 04, 05, 06
Jerrold	07, 08, 09, 10, 11, 12, 13, 14, 15
Macom	16, 17, 18
Magnavox	19
Oak	20, 21, 22
Panasonic	23, 24
Philips	25, 26, 27, 28, 29, 30
Pioneer	31, 32
S. Atlanta	33, 34, 35
Samsung	36
Tocom	37
Zenith	38, 39

Manufacturers’ codes for DBS tuner

Manufacturer	Codes
Echostar	40
G.I.	41
Hitachi	42
Hughes	43
Panasonic	44
Primestar	45
RCA	46
Sony	47
Toshiba	48

Initial setting: 01

❏Changing the transmittable signals for operating a DVD player

1Set the mode selector to “DVD.”

2Press and hold DVR/DVD .

3Press DVR/DVD.

4Enter the manufacturer’s code using buttons 1 – 9, and 0.

See “Manufacturers’ codes for DVD player” below.

5Release DVR/DVD .

Now, you can perform the following operation on the DVD player.

DVR/DVD :	Turn on or off the DVD player.
3:	Start playback.
¡:	Skip to the beginning of the next chapter
	(or fast-forward for some models).
1:	Return to the beginning of the current
	chapter (or fast-reverse for some
	models).
7:	Stop playback.
8:	Pause playback.

TOP MENU/MENU: Display the menu recorded on DVD

VIDEO discs.

5/∞/3/2:Select an item on the menu screen.

SET:Enter the selected item.

1 – 9, 0, h10: Select the chapter number.

See the instructions supplied with the DVD player for details.

6Try to operate your DVD player by pressing DVR/DVD .

When your DVD player turns on or off, you have entered the correct code.

Manufacturers’ codes for DVD player

Manufacturer	Codes
JVC	01
Hitachi	02
Kenwood	03, 04
Magnavox	05
Marantz	06
Mitsubishi	07
Onkyo	08, 09
Panasonic	10
Philips	06
Pioneer	11
Proscan	12
RCA	12
Samsung	13
Sony	14
Toshiba	05
Yamaha	15
Zenith	05, 16

Initial setting: 01

NOTE

You cannot use this remote control to operate other manufacturers’ DVD recorders than JVC.

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

41