Do not connect the AC power plug to the wall outlet until all connections are completed.
Speaker Layout Diagram
SW
L | C | R |
| Center |
|
|
|
|
| speaker (C) |
|
| |
|
|
| SURROUND BACK SURROUND | CENTER | FRONT | |
LS |
| RS | SPEAKERS | SPEAKERS | SPEAKER | SPEAKERS |
| RIGHT LEFT | RIGHT LEFT |
| RIGHT LEFT | ||
|
|
| SUBWOOFER |
|
|
|
|
|
| OUT |
|
|
|
| SBL | (*SB) | SBR |
|
|
|
|
|
|
| CAUTION:SPEAKER IMPEDANCE 6 |
| ||
|
|
| Right surround | Left |
| Left front |
|
|
| back speaker | surround | speaker | |
|
| Powered | (SBR) | speaker (LS) | (L) | |
|
|
|
|
|
| |
|
| subwoofer | *Left surround | Right |
| Right front |
|
| (SW) |
| |||
|
|
| back speaker | surround | speaker | |
|
|
| (SBL) | speaker (RS) | (R) | |
CAUTIONS:
•Use speakers with the SPEAKER IMPEDANCE indicated by the speaker terminals (6 Ω – 16 Ω).
•DO NOT connect more than one speaker to one speaker terminal.
Connecting the speakers
Turn off all components before making connections.
You can enjoy the surround sound by one surround back speaker. When using one surround back speaker,
–set “SB OUT” to “<1SPK>” (see page 22) and
–connect the surround back speaker to the left surround back speaker terminal. (No sound comes from the speaker if you connect it to the right surround back speaker terminal.)
1 | 2 | 1 | 3 |
|
| 2 |
|
+ | + |
– | – |
•For each speaker, connect the (+) and
Connecting the powered subwoofer
By connecting a subwoofer, you can enhance the bass or reproduce the original LFE signals recorded in digital software.
Connect the input jack of a powered subwoofer to the SUBWOOFER OUT jack on the rear panel, using a cord with RCA pin plugs (not supplied).
• Refer also to the manual supplied with your subwoofer.
After connecting all the speakers and/or a subwoofer, set the speaker setting information properly to obtain the best possible surround effect. For details, see pages 20 to 24.
NOTE
You can place a subwoofer wherever you like since bass sound is
6