Selecting the video input setting

Select the proper video input setting according to the connection

method on pages 10 to 15.

From the remote control ONLY:Press VIDEO INPUT to select the video input setting.

•Each time you press the button, the input setting changes as follows. This setting is memorized for each source.

AUTO SURR

DIGITAL

L C

R

DIGITAL

S.WFR

LFE

LS

RS

HDMI CMPNT (component)

S(S-video) C (composite)

(Back to the beginning)

NOTES

•When “DVR/DVD” or “VCR” is selected as the source and “VIDEO OUTPUT” (see page 33) is set to “RGB/C,” the video input setting changes between “RGB,” “S,” and “C.”

•For “VCR” and “VIDEO,” you can select “HDMI” and “CMPNT” for the source you assigned in “HDMI SELECT” and “CMPNT SELECT” (see page 32).

•When the video input setting and the audio input setting are both set to “HDMI,” changing the video input setting changes the audio input setting to the appropriate setting.

Selecting the audio input setting

Select the proper audio input setting according to the connection method (analogue or digital) on pages 10 to 16.

•In case of digital connection using the terminals on the rear of the receiver, you also need to select the correct digital input terminal. (See “Setting the digital input (DIGITAL IN) terminals— DIGITAL IN 1/2/3” on page 31.)

From the remote control ONLY:

Press AUDIO INPUT to select the audio input setting.

•Each time you press the button, the audio input setting changes as follows. This setting is memorized for each source.

AUTO SURR

DIGITAL

L C

R

DIGITAL

S.WFR

LFE

LS

RS

HDMI DIGITAL ANALOG

A MULTI (Back to the beginning)

HDMI (for “DVR/DVD,” “VIDEO” and “VCR”):

Select for the source with HDMI connection. The receiver automatically detects the incoming signal format, then the digital signal format

indicator (LINEAR PCM, , , or

96/24) for the detected signal lights up, and the HDMI lamp on the front panel lights up.

DIGITAL*: Select for the digital input setting. The receiver automatically detects the incoming signal format, then the digital signal format indicator

(LINEAR PCM, , , or 96/24) for the detected signal lights up.

ANALOG*: Select for the analogue input setting. The (ANALOGUE) ANALOG indicator lights up on the display.

A MULTI (Only for “DVR/DVD”):

Select when connecting a DVD recorder or DVD player to DVD MULTI IN jacks (see page 12). The ANALOG indicator lights up on the display.

*When “TV” is selected as the source, only “DIGITAL” or “ANALOGUE” appears on the display as the audio input setting.

NOTES

•“HDMI” is available only for the source with “HDMI” selected in the video input setting (see the left column).

•“DIGITAL” is available for the source assigned for “DIGITAL IN 1,” “DIGITAL IN 2,” or “DIGITAL IN 3.” See page 25 for details.

Initial setting of VIDEO INPUT and AUDIO INPUT for each source

Setting

VIDEO INPUT

AUDIO INPUT

Source

 

 

 

 

 

 

 

 

 

DVR/DVD

HDMI

HDMI

 

 

 

 

 

VCR

 

S

ANALOG

 

 

 

 

 

VIDEO

HDMI

HDMI

 

 

 

 

 

TV

 

 

 

DIGITAL

 

 

 

 

 

 

 

 

USB WIRELESS

 

 

 

DIGITAL (fixed)

 

 

 

USB TERMINAL

 

 

 

DIGITAL (fixed)

 

 

 

FM

 

 

 

ANALOG (fixed)

 

 

 

AM

 

 

 

ANALOG (fixed)

 

 

 

AUX

 

S

DIGITAL

 

 

 

 

 

3 Adjust the volume

To increase the volume, turn MASTER VOLUME control clockwise (or press VOLUME + on the remote control).

To decrease the volume, turn MASTER VOLUME control counterclockwise (or press VOLUME – on the remote control).

•When you adjust the volume, the volume level indication appears on the display for a while.

ANALOG

AUTO SURR

LR

S.WFR

CAUTION:

Always set the volume to the minimum before starting any sources. If the volume is set at its high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.

NOTE

The volume level can be adjusted within the range of “0” (minimum) to “50” (maximum).

20