Using the Timer
2TIMER
1 CLOCK
Display
4 – SELECT 5 + | 1 | 2 | 3 | POWER |
4 | 5 | 6 | SLEEP | |
| CLOCK | TIMER |
|
|
| – SELECT + |
| SHIFT | |
8 SET | 7 | 8 | 9 | |
| SET |
| SHIFT | |
| 10 | 10 | FM MODE | FM/AM |
| DISC | PLAY MODE AUX | ||
| DISC | 7/CLEAR | £/8 | |
| DISC | C D | ||
|
|
| ||
| A | B |
|
|
| REC PAUSE |
| DECK | |
|
|
| VOLUME | |
| SOUND | ACTIVE |
|
|
| MODE | BASS EX. |
|
|
REMOTE CONTROL
Clock,
| kHz |
| MHz |
| A.BASS EX S.MODE |
CONT. RANDOM |
|
ALL PRGM CLOCK | REC SLEEP MONO ST |
Timer indicator
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
The timers let you control listening and recording functions automatically.
Use the Remote Control to set the clock and timers.
Setting the Clock
The timers depend on the clock: the clock must be right for the timers to work as you expect. You can set the clock whether the Unit is on or off.
SHIFT
1
CLOCK
45
–SELECT +
8
SET
Note that the clock must be set, otherwise the timers cannot be set.
1.Press the SHIFT button.
2.Press the 1 CLOCK button.
The CLOCK indicator on the display lights up and the clock time blinks.
3.Press the SELECT 5 + or 4 – button to set the time.
Pressing the 5 + button increases the time and pressing 4 – decreases the time. Pressing the button continuously advances or decreases the time in 10 minute intervals.
4.Press the 8 SET button.
The clock stops blinking, and the clock timer starts from 0 seconds.
CAUTION: If there is a power failure, the clock loses its setting. The display shows “AM12:00”, and the clock must be reset.
23
