Connecting the Speakers, VCR or other equipment | JVC SP-D302

CAUTION: Make all connections before plugging the Unit into an AC power outlet.

Connecting the Speakers

For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the System.

1.Open each of the terminals and insert the speaker wires firmly, then close the terminals.

2.Connect the red (+) and black (–) terminals of the right side speaker to the red (+) and black (–) terminals marked RIGHT on the System.

Connect the red (+) and black (–) terminals of the left side speaker to the red (+) and black (–) terminals marked LEFT on the System.

Laying Out the Unit

1 cm (7/16”)

1 cm (7/16”)

Leave a space of at least 1 cm on both sides of the Unit and at least 10 cm at the back, for ventilation.

Right Speaker

Left Speaker

IMPORTANT: Use speakers with the correct impedance only. The correct impedance is indicated on the back panel.

CAUTION: If a TV is installed near speakers, the TV may display irregular colors. In this case, set the speakers away from the TV.

Connecting Auxiliary Equipment

VCR or other equipment

To listen to this source, press the AUX button.

AUX

RIGHT LEFT

Now you can plug the AC power cord into the wall outlet, and your System is

at your command!

5

Image 7

JVC SP-D302 manual Connecting the Speakers, Connecting Auxiliary Equipment, VCR or other equipment, Right Speaker

Contents

MX-D302T Important for Laser Products How This Manual Is Organized FeaturesInstallation of the Unit Power cord Table of Contents Getting Started AccessoriesHow to Put Batteries in the Remote Control Using the Remote Control Using an FM 75-Ohm Antenna Cable not supplied Connecting the FM AntennaConnecting the AM Antenna Using the Supplied Wire Antenna Right Speaker Connecting the SpeakersConnecting Auxiliary Equipment VCR or other equipment On the Unit On the Remote Control Turning the System On Turning the Power On and OffCommon Operations Display Reinforcing the Bass Sound Adjusting the VolumeSound Modes Listening to Auxiliary Equipment Set the Volume control to Press the AUX button One Touch Radio Using the TunerTuning In a Station Switching between Frequency Bands Changing the FM Reception Mode Presetting StationsThree Ways to Select a Station Disc indicators Using the CD PlayerCD £/8 Place a CD, with its label side up, onto the tray For Normal Play Play mode indicator is not litLoading Discs Quickest Way to Start a CD Is with the One Touch Operation Selecting a Disc, Track Or Passage Within a Track Basics of Using the CD Player Normal PlayLocating a Track With the Remote Control Directly Playing a Disc Programming the Playing Order of the Tracks Continuous Play Press the Random button Random PlayPress the £/8 button Unlocking the Trays Repeating a Selection or the DiscsTray Lock Function Locking the Trays Press the 0 button for the deck you want to use Using the Cassette DeckRegular Play One Touch Play Finding the Beginning of the Current Selection Reverse ModeMusic Scan Fast Left And Fast Right Things to Know before You Start Recording Recording Standard Recording Recording AM Station to Tape How to Use the Dubbing ButtonCD Direct Recording Tape to Tape Recording Dubbing Press the Select 5 + or 4 button to set the time Using the TimerSetting the Clock Press the Shift button Press the 1 Clock button Press the Select 5 + or 4 button to select the source Setting the TimerSet the time you want the Unit to come on Set the time you want the Unit to turn off Before Turning the Unit Off Setting the Sleep TimerTo Change the Sleep Timer Setting To Cancel the Sleep Timer Setting Care And Maintenance Action TroubleshootingSymptom Possible Cause Don’t service it yourself HOW to Locate Your JVC Service Center Limited Warranty AUDIO-1 Specifications